Practice Test Geeks(API 510) Certified Pressure Vessel Inspector Practice Test
← All API 510 Flashcard Decks

API 510 Welding Procedures and Qualifications Flashcards

6 cards from real API 510 practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.

Read the first 6 API 510 Welding Procedures and Qualifications flashcards as text

  1. According to API 510 and ASME Section IX, who is responsible for qualifying welding procedures used in pressure vessel repair?

    Answer: The owner/operator or their contractor

    API 510 requires that the owner/operator or their authorized repair contractor qualify and certify all welding procedures per ASME Section IX.

  2. What document records the specific variables tested during welding procedure qualification per ASME Section IX?

    Answer: Procedure Qualification Record (PQR)

    The Procedure Qualification Record (PQR) documents the actual test variables and results used to support the Welding Procedure Specification.

  3. When a welder has not welded with a qualified process for more than 6 months, what is required per ASME Section IX?

    Answer: Requalification of the welder

    ASME Section IX requires welder requalification if they have not welded in a qualifying process within the preceding 6-month period.

  4. Under API 510, which ASME standard governs the qualification of welding procedures and welders for pressure vessel repairs?

    Answer: ASME Section IX

    ASME Section IX — Welding, Brazing, and Fusing Qualifications — is the governing standard for procedure and welder qualification referenced by API 510.

  5. A welding procedure qualified using a P-1 base metal is generally acceptable for welding which other P-number groups?

    Answer: It depends on the essential variables specified in the WPS

    The applicability of a WPS to different P-number groups is governed by the essential variables listed in ASME Section IX, and qualification rules vary by process.

  6. In API 510 repair welding, preheat and interpass temperature requirements are primarily determined by which factor?

    Answer: Base metal chemistry and thickness

    Preheat and interpass temperature requirements are driven by the base metal's chemical composition and thickness to prevent hydrogen cracking and ensure proper metallurgical properties.