← All AME Flashcard Decks

Digital Avionics and Instruments Flashcards

7 cards from real AME practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.

Read the first 7 Digital Avionics and Instruments flashcards as text
  1. In an ARINC 429 data word, which bits contain the label that identifies the data type?

    Answer: Bits 1-8

    The ARINC 429 label occupies bits 1-8 and is coded in octal to identify the parameter being transmitted.

  2. What type of parity does an ARINC 429 word use in bit 32?

    Answer: Odd parity

    Bit 32 is set so that the total number of logic 1s in the 32-bit word is odd.

  3. Which statement correctly describes data flow on an ARINC 429 bus?

    Answer: Unidirectional, one transmitter to up to 20 receivers

    ARINC 429 is a simplex bus where a single transmitter sends to as many as 20 receivers.

  4. What is the high-speed data rate specified for ARINC 429?

    Answer: 100 kbps

    ARINC 429 runs at 100 kbps in high-speed mode and 12.5-14.5 kbps in low-speed mode.

  5. On a MIL-STD-1553 data bus, which device initiates all data transfers?

    Answer: Bus controller

    MIL-STD-1553 uses command/response protocol in which the bus controller commands every transfer.

  6. Which encoding method is used on a MIL-STD-1553 data bus?

    Answer: Manchester II bi-phase

    MIL-STD-1553 transmits at 1 Mbps using Manchester II bi-phase encoding, which is self-clocking.

  7. ARINC 664 Part 7 (AFDX) networks guarantee deterministic bandwidth by using which concept?

    Answer: Virtual links

    AFDX assigns each data flow a virtual link with a defined bandwidth allocation gap so delivery is deterministic over switched Ethernet.