ALC ALC Operator Certification & Training 1 — Questions and Answers
Question 1: According to OSHA, who is responsible for ensuring aerial lift operators are properly trained and authorized?
- The employer (Correct answer)
- The equipment manufacturer
- The operator themselves
- The state labor department
Correct answer: The employer
OSHA 29 CFR 1926.453 and 1910.178 place the duty to train and authorize operators squarely on the employer.
Question 2: Which OSHA standard specifically requires training for aerial lift operators used in construction?
- 29 CFR 1926.453 (Correct answer)
- 29 CFR 1910.147
- 29 CFR 1926.502
- 29 CFR 1910.217
Correct answer: 29 CFR 1926.453
29 CFR 1926.453 covers aerial lifts in construction and mandates that only trained and authorized operators use them.
Question 3: Under what circumstance does OSHA require an aerial lift operator to be retrained?
- When the operator is observed operating the lift in an unsafe manner (Correct answer)
- Only after a serious accident occurs
- Every calendar year regardless of performance
- When the operator changes employers
Correct answer: When the operator is observed operating the lift in an unsafe manner
OSHA requires retraining when operators demonstrate unsafe practices, after accidents, or when new equipment or conditions are introduced.
Question 4: What is the minimum age to legally operate a powered aerial lift on a US construction site under OSHA regulations?
- 18 years old (Correct answer)
- 16 years old
- 21 years old
- There is no minimum age specified
Correct answer: 18 years old
The Fair Labor Standards Act (FLSA) prohibits workers under 18 from operating most powered equipment, including aerial lifts, on construction sites.
Question 5: What document should an aerial lift operator have accessible while operating the equipment?
- The operator's manual for that specific lift model (Correct answer)
- A general forklift certification card
- A blank inspection log
- The employer's OSHA 300 log
Correct answer: The operator's manual for that specific lift model
ANSI A92 standards require the operator's manual to be on or near the machine so operators can reference model-specific instructions.
Question 6: What must aerial lift operator training include according to OSHA and ANSI A92 standards?
- Formal instruction, hands-on practice, and an evaluation of the operator's performance (Correct answer)
- A written exam only
- A video course lasting at least 8 hours
- Proof of a valid driver's license
Correct answer: Formal instruction, hands-on practice, and an evaluation of the operator's performance
ANSI A92.22 specifies a three-part qualification: knowledge (instruction), skills (hands-on practice), and evaluation by a qualified trainer.
ALC ALC Operator Certification & Training 1
According to OSHA, who is responsible for ensuring aerial lift operators are properly trained and authorized?