Alabama Boaters Trailering and Launching 5

Question 1

What is the purpose of bunks or rollers on a boat trailer?

Accepted Answer

To support the hull and allow the boat to slide on and off easily

Answer

Bunks and rollers support the boat hull during trailering and allow the boat to slide off during launching and back on during retrieval.

Question 2

When must you slow down while towing a boat trailer through a construction zone?

Accepted Answer

Always comply with posted reduced speed limits in all construction zones

Answer

Alabama law requires drivers to comply with all posted construction zone speed limits at all times, with doubled fines for violations.

Question 3

What should you inspect on the trailer coupler before each tow?

Accepted Answer

The coupler latch, ball socket wear, and that the locking pin or clip is in place

Answer

A complete coupler inspection includes checking the latch, the ball socket for wear, and confirming the locking pin or clip is secured.

Question 4

If your boat trailer tire blows out while towing at highway speed, you should:

Accepted Answer

Grip the steering wheel firmly, ease off the accelerator, and steer smoothly to the shoulder

Answer

Avoid hard braking during a trailer tire blowout — grip firmly, ease off the gas, and gently guide the vehicle to the shoulder.

Question 5

What is the correct procedure when launching a boat solo without a helper?

Accepted Answer

Tie a long line to the bow cleat before backing down so you can retrieve the boat after parking

Answer

Solo launching requires attaching a long bow line before backing down so the boat can be tied to a dock cleat while you park the tow vehicle.

(Alabama Boaters) Alabama Boaters Certification Practice Test