AK Equipment Operation & Maintenance 2

Question 1

When calibrating a hand-held dynamometer for applied kinesiology muscle testing, what is the recommended verification frequency?

Accepted Answer

Annually or per manufacturer specification

Answer

Dynamometers should be calibrated annually or per manufacturer specification to ensure consistent and reliable force measurements.

Question 2

A drop-piece table mechanism fails to release properly during an AK adjustment. The FIRST corrective step should be:

Accepted Answer

Clean and lubricate the drop mechanism according to the service manual

Answer

Cleaning and lubricating the drop mechanism per the service manual is the appropriate first corrective step before considering more invasive repairs.

Question 3

Which feature is most critical when selecting a treatment table for applied kinesiology procedures requiring position changes during muscle testing?

Accepted Answer

Sectional adjustability with locking mechanisms

Answer

Sectional adjustability with locking mechanisms allows precise positioning for different muscle tests while maintaining patient stability and safety.

Question 4

Cold laser (LLLT) therapy units used as adjunctive AK treatment require what documentation before each use?

Accepted Answer

Wavelength and power output log

Answer

Wavelength and power output must be logged before each use to ensure dosimetry accuracy and maintain treatment records.

Question 5

A TENS unit electrode pad used in AK therapy shows reduced adhesion. The correct response is:

Accepted Answer

Replace the electrode pad immediately

Answer

Electrode pads with reduced adhesion deliver inconsistent current and should be replaced immediately to ensure safe and effective therapy.

(AK) Certified Applied Kinesiologist Practice Test