โ† All AK Flashcard Decks

Equipment Operation & Maintenance Flashcards

7 cards from real AK practice questions. Tap to flip, then mark Knew It or Still Learning โ€” missed cards come back until you master them.

Read the first 7 Equipment Operation & Maintenance flashcards as text
  1. In applied kinesiology, an inclinometer is used to measure:

    Answer: Range of motion in degrees

    An inclinometer measures joint range of motion in degrees, providing objective data to complement AK muscle testing findings.

  2. A reflex hammer's rubber head has hardened and cracked. This defect will most likely cause:

    Answer: Inconsistent deep tendon reflex elicitation

    A cracked or hardened reflex hammer head delivers inconsistent stimulus force, making deep tendon reflex assessment unreliable.

  3. When disinfecting an AK treatment table between patients, which surface areas require particular attention to prevent cross-contamination?

    Answer: Headpiece, face cradle, and any upholstered contact surfaces

    Headpiece, face cradle, and upholstered contact surfaces harbor the highest pathogen load from direct patient contact and require thorough disinfection.

  4. A goniometer used for joint angle measurement in AK evaluation should be checked for accuracy by:

    Answer: Comparing readings against a calibrated protractor or reference standard

    Goniometer accuracy is verified by comparing its readings against a calibrated protractor or known reference standard at multiple angles.

  5. Electromagnetic muscle testing devices (digital muscle testers) in AK practice should be zeroed (tared) at what point in the testing protocol?

    Answer: Before each individual test to account for drift

    Zeroing before each individual test eliminates measurement drift and ensures each reading reflects true muscle force output.

  6. Which maintenance task is MOST important for the longevity of hydraulic lift mechanisms on adjustable treatment tables?

    Answer: Regular fluid level checks and replacement per manufacturer schedule

    Regular hydraulic fluid level checks and replacement per manufacturer schedule prevent seal failure and maintain safe lifting capacity.

  7. A portable muscle testing station's battery indicator shows 20% charge during a clinical AK session. Best practice is to:

    Answer: Complete only essential tests and schedule recharge before next session

    Completing only essential tests and scheduling a recharge prevents mid-test power failure that could compromise data integrity and patient care continuity.