Tools & Equipment Flashcards
7 cards from real AIT practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 7 Tools & Equipment flashcards as text
How frequently should power tool cords be inspected for damage?
Answer: Before each use
Power tool cords must be inspected before each use to identify cuts, fraying, exposed conductors, or damaged plugs that could result in electric shock or fire.
What is the correct response when a power tool begins to overheat during use?
Answer: Shut it off and allow it to cool completely before resuming
An overheating tool should be immediately shut off and allowed to cool naturally; continuing use risks motor burnout, insulation failure, or fire.
What is the recommended method for storing drill bits?
Answer: In a labeled index or case organized by size
Storing drill bits in a labeled index or case protects cutting edges from damage, organizes them by size for quick selection, and prevents loss.
What substance is commonly applied to hand saw blades to reduce friction during cutting?
Answer: Paste wax or beeswax
Paste wax or beeswax leaves a thin, dry lubricating film on saw blades that reduces friction and prevents rust without attracting sawdust like liquid lubricants.
Why are torque specifications provided for fasteners in assemblies?
Answer: To ensure proper clamping force without over- or under-tightening
Torque specifications ensure fasteners achieve the correct clamping force: under-torqued joints can loosen and fail, while over-torqued fasteners can strip threads or fracture.
Before replacing a circular saw blade, the operator must first:
Answer: Unplug the saw or remove the battery
De-energizing the tool by unplugging it or removing the battery is required before any blade change to eliminate the risk of accidental start-up, consistent with lockout/tagout procedures.
When a power tool produces unusual sounds or excessive vibration during operation, the correct action is to:
Answer: Stop the tool immediately and inspect it before further use
Unusual sounds or vibration indicate a potential mechanical fault; immediate shutdown and inspection prevent equipment damage, tool failure, and operator injury.