AIRPORT EMPLOYEE Aircraft Fueling and De-icing Operations 3

Question 1

Who has the final authority to certify that an aircraft is airworthy following de-icing and safe to depart?

Accepted Answer

The aircraft captain (pilot in command)

Answer

The de-icing crew chief on the ramp

Answer

Air traffic control in the tower

Answer

The airline operations control center

Question 2

What is the purpose of a fuel density check performed before fueling an aircraft?

Accepted Answer

To convert fuel volume to weight for accurate flight planning

Answer

To confirm the fuel pump is operating correctly

Answer

To test fuel for microbial contamination

Answer

To verify the fuel meets color and odor standards

Question 3

What is the maximum freeze point specification for standard Jet-A fuel?

Accepted Answer

-47°C (-52.6°F)

Answer

-10°C (14°F)

Answer

-20°C (-4°F)

Answer

-40°C (-40°F)

Question 4

Which organizations jointly establish de-icing fluid specifications and regulations in the United States?

Accepted Answer

FAA and SAE International

Answer

IATA and ICAO

Answer

TSA and DHS

Answer

NTSB and EPA

Question 5

What quality control check must fueling personnel perform at the start of each fueling shift?

Accepted Answer

Sump fuel trucks and inspect samples for water and sediment

Answer

Review the airline's flight departure schedule

Answer

Inspect aircraft maintenance logbooks

Answer

Count and verify all fueling equipment inventory

Question 6

What does the acronym 'HOT' stand for in winter aircraft operations?

Accepted Answer

Holdover Time

Answer

Heat-Operated Treatment

Answer

High-Output Temperature

Answer

Hazardous Operations Threshold

Question 7

What is the primary environmental concern associated with aircraft de-icing operations at airports?

Accepted Answer

Contamination of local waterways from glycol-based fluid runoff

Answer

Noise pollution generated by de-icing trucks and equipment

Answer

Air pollution from aerosolized de-icing fluid spray

Answer

Carbon emissions from heating de-icing fluid to application temperature