AIRPORT EMPLOYEE Airport Operations and Regulations 1

Question 1

Which FAA regulation governs certification and operations of commercial service airports?

Accepted Answer

14 CFR Part 139

Answer

14 CFR Part 139 sets the standards for certifying and operating commercial service airports in the United States.

Question 2

What is a NOTAM in aviation operations?

Accepted Answer

Notice to Air Missions — a notice about changes in aeronautical information

Answer

A NOTAM (Notice to Air Missions) is an official advisory about changes affecting flight safety such as closed runways, hazards, or temporary flight restrictions.

Question 3

What does 'gate hold' mean in airport operations?

Accepted Answer

An instruction to delay departure of an aircraft at the gate to manage air traffic flow

Answer

A gate hold is an ATC ground delay program tool that holds aircraft at the departure gate to manage en-route traffic congestion and reduce airborne holding.

Question 4

What does 'ground stop' mean in air traffic control?

Accepted Answer

A measure preventing aircraft from departing toward a destination due to congestion or weather

Answer

A ground stop is an ATC initiative that prevents aircraft from departing toward a destination airport or sector due to capacity, weather, or other constraints.

Question 5

What is the purpose of an Airport Layout Plan (ALP)?

Accepted Answer

To provide an official drawing of the existing and planned airport facilities for FAA approval

Answer

An ALP is a scaled drawing showing all existing and proposed airport facilities and must be kept current and FAA-approved as a condition of receiving federal airport grants.

AIRPORT EMPLOYEE Practice Test

AIRPORT EMPLOYEE Practice Test

AIRPORT EMPLOYEE Airport Operations and Regulations 1