Practice Test Geeks(AFE) Association for Facilities Engineering Certification Practice Test
← All AFE Flashcard Decks

Safety, Codes & Regulatory Compliance Flashcards

7 cards from real AFE practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.

Read the first 7 Safety, Codes & Regulatory Compliance flashcards as text

  1. Which OSHA regulation requires employers to develop and implement a written Hazard Communication Program?

    Answer: 29 CFR 1910.1200

    29 CFR 1910.1200, the Hazard Communication Standard (HCS), requires employers to establish a written Hazard Communication Program.

  2. A facilities engineer is reviewing egress requirements. Under NFPA 101 (Life Safety Code), what is the minimum corridor width required for new business occupancies?

    Answer: 44 inches

    NFPA 101 requires a minimum corridor width of 44 inches in new business occupancies to facilitate safe egress.

  3. Under the Resource Conservation and Recovery Act (RCRA), a facility generating more than 1,000 kg of hazardous waste per month is classified as a:

    Answer: Large Quantity Generator

    RCRA classifies facilities generating more than 1,000 kg of hazardous waste per month as Large Quantity Generators (LQGs), subject to the most stringent requirements.

  4. Which standard governs the inspection, testing, and maintenance of water-based fire protection systems such as sprinklers?

    Answer: NFPA 25

    NFPA 25 is the Standard for the Inspection, Testing, and Maintenance of Water-Based Fire Protection Systems.

  5. A facilities engineer must assess electrical safety requirements. Under NFPA 70E, an 'arc flash hazard analysis' is required when:

    Answer: Work is performed within the arc flash boundary on energized equipment above 50V

    NFPA 70E requires an arc flash hazard analysis when energized electrical work is performed within the arc flash boundary on equipment operating above 50 volts.

  6. Under the Clean Air Act (CAA), which program requires facilities with large quantities of regulated substances to develop Risk Management Plans (RMPs)?

    Answer: Section 112(r) - Accidental Release Prevention

    CAA Section 112(r) requires facilities that handle threshold quantities of regulated substances to develop and submit Risk Management Plans to prevent accidental releases.

  7. When calculating the occupant load of a mixed-use building for egress purposes under the IBC, which method is used?

    Answer: Calculate each use area separately using its applicable occupant load factor

    The IBC requires each use area to be calculated separately using its specific occupant load factor, then summed to determine total building occupancy.