← All AET Flashcard Decks

Digital Electronics and Microprocessors Flashcards

7 cards from real AET practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.

Read the first 7 Digital Electronics and Microprocessors flashcards as text
  1. An ADC (Analog-to-Digital Converter) performs which conversion in avionics systems?

    Answer: Converts analog signals to digital signals

    An ADC samples continuous analog sensor data and converts it to discrete digital values for processing by a microprocessor.

  2. The ARINC 429 data bus used in commercial aviation is best described as a:

    Answer: Single-transmitter, multiple-receiver unidirectional bus

    ARINC 429 uses a unidirectional architecture with one transmitter driving up to 20 receivers on a twisted-pair wire.

  3. What does CRC stand for in the context of digital data communications?

    Answer: Cyclic Redundancy Check

    CRC (Cyclic Redundancy Check) is an error-detection algorithm that generates a checksum to verify data integrity during transmission.

  4. How many discrete digital output values can a 12-bit ADC produce?

    Answer: 4,096

    A 12-bit ADC can represent 2^12 = 4,096 discrete digital values, ranging from 0 to 4,095.

  5. PWM (Pulse Width Modulation) is used in avionics primarily to:

    Answer: Control motors and actuators by varying the duty cycle

    PWM controls the average power delivered to motors and actuators by varying the on-time (duty cycle) of a fixed-frequency digital pulse.

  6. Which type of data transmission sends bits one at a time sequentially over a single channel?

    Answer: Serial transmission

    Serial transmission sends data bit-by-bit over a single wire, as used in avionics buses like ARINC 429 and RS-232.

  7. What is the output of an XOR gate when both of its inputs are logic HIGH?

    Answer: LOW

    An XOR (Exclusive OR) gate outputs LOW when both inputs are the same state (both HIGH or both LOW).