Practice Test GeeksAET - Avionics Electronic Technicians Practice Test
← All AET Flashcard Decks

Regulatory Compliance and Certification Flashcards

6 cards from real AET practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.

Read the first 6 Regulatory Compliance and Certification flashcards as text

  1. Which FAA regulation governs the certification of avionics equipment for installation in aircraft?

    Answer: FAR Part 21 and applicable TSOs

    FAR Part 21 governs certification procedures for products and parts, while Technical Standard Orders (TSOs) define minimum performance standards for specific avionics equipment.

  2. What does a Supplemental Type Certificate (STC) authorize?

    Answer: Modification of a certificated aircraft or installation of non-original equipment

    An STC is issued by the FAA to approve a modification to a type-certificated aircraft that was not included in the original Type Certificate.

  3. Under FCC regulations, who must hold a license to operate aviation radio transmitters in the US?

    Answer: The aircraft must hold an FCC Aircraft Radio Station License

    FCC regulations require aircraft operating radio transmitters to hold an Aircraft Radio Station License, and pilots operating internationally need a Restricted Radiotelephone Operator Permit.

  4. What is the purpose of FAA Advisory Circular AC 43.13-1B?

    Answer: Provide acceptable methods, techniques, and practices for aircraft inspection and repair

    AC 43.13-1B provides acceptable maintenance and repair methods for aircraft structures, systems, and powerplants, serving as a key reference for A&P and avionics technicians.

  5. Which FAA authorization allows an avionics technician to approve aircraft for return to service after maintenance?

    Answer: Airframe and Powerplant (A&P) Certificate with Inspection Authorization (IA) for major repairs

    An A&P mechanic may return aircraft to service after maintenance; an Inspection Authorization (IA) is additionally required for annual inspections and major repairs/alterations.

  6. What document must accompany an avionics component to prove it is airworthy and approved for installation?

    Answer: FAA Form 8130-3 (Airworthiness Approval Tag)

    FAA Form 8130-3 is the Airworthiness Approval Tag that certifies a part or component has been inspected and meets airworthiness requirements for installation.