AERA Materials, Coatings & Surface Finishing Flashcards
6 cards from real AERA practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 6 AERA Materials, Coatings & Surface Finishing flashcards as text
What is the primary purpose of applying a thermal barrier coating to piston crowns in high-performance engine rebuilds per AERA guidelines?
Answer: To reduce heat transfer into the piston, lowering piston temperature and improving combustion efficiency
Thermal barrier coatings insulate the piston crown from combustion heat, keeping temperatures lower and helping retain heat in the combustion chamber for more complete burning.
Which cylinder bore finishing process does AERA recommend to produce the correct cross-hatch angle for optimal ring seating?
Answer: Plateau honing with a proper cross-hatch pattern (typically 45–60°)
Plateau honing removes the sharp peaks left by boring while creating a cross-hatch pattern that retains oil and allows rings to seat quickly without excessive break-in wear.
What is the purpose of applying a dry-film lubricant (moly) coating to piston skirts during engine rebuilding?
Answer: To reduce friction between the piston skirt and cylinder wall, especially during cold start break-in
Moly (molybdenum disulfide) dry-film coatings bond to the skirt surface and reduce metal-to-metal contact friction during the critical break-in period when the oil film is not yet fully established.
According to AERA guidelines, what type of surface treatment can be applied to crankshaft journals to restore hardness after grinding beyond OEM specifications?
Answer: Nitriding or chrome plating per AERA-approved processes
Nitriding or approved chrome/ceramic plating can restore journal hardness and surface integrity after grinding, provided the rebuilder follows AERA protocols for thickness and finish.
What does the term 'valley' refer to in the context of AERA cylinder bore surface finish specifications?
Answer: The low areas of the cross-hatch hone pattern that retain lubricating oil
In surface finish terminology, valleys are the recesses in the honed surface profile that act as oil reservoirs, supporting the lubrication film between the ring and bore.
When rebuilding an aluminum block engine, what precaution does AERA specify regarding the use of steel sleeve inserts in cylinder bores?
Answer: Sleeves must be properly sized and press-fit or siamesed per spec to prevent movement and ensure correct heat transfer
Press-fit steel sleeves must meet AERA dimensional tolerances for interference fit to remain stationary during operation and allow adequate thermal conductivity through the aluminum block.