← All AEP Flashcard Decks

Power Generation & Transmission Flashcards

7 cards from real AEP practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.

Read the first 7 Power Generation & Transmission flashcards as text
  1. What is the function of a lightning arrester (surge arrester) on a transmission line?

    Answer: Divert transient overvoltages safely to ground

    Surge arresters clamp transient overvoltages caused by lightning or switching and divert the surge current to ground, protecting equipment insulation.

  2. In a combined-cycle natural gas plant, what happens to the exhaust heat from the gas turbine?

    Answer: It is used to produce steam that drives a steam turbine for additional power

    Combined-cycle plants recover hot exhaust gas from the combustion turbine in a heat recovery steam generator (HRSG) to produce steam that drives a second turbine, boosting overall efficiency above 60%.

  3. What is the purpose of a static VAR compensator (SVC) on a transmission system?

    Answer: Provide dynamic reactive power support to regulate voltage

    An SVC rapidly injects or absorbs reactive power to maintain stable voltage at key transmission buses during load changes or faults.

  4. Which AEP subsidiary operates the high-voltage transmission system across much of the central and eastern U.S.?

    Answer: AEP Transmission

    AEP Transmission (through subsidiaries like AEP Transmission Holding Company) owns and operates one of the largest high-voltage transmission networks in the nation.

  5. What does 'capacity factor' measure for a power plant?

    Answer: The ratio of actual output to maximum possible output over a period

    Capacity factor is the ratio of actual energy produced over a time period to the energy that would have been produced if the plant ran at full rated capacity the entire time.

  6. What is 'islanding' in the context of power grid operations?

    Answer: A grid segment that operates independently after being separated from the main grid

    Islanding occurs when a portion of the network becomes electrically isolated from the main grid but continues to be energized by local generation, which can create safety and synchronization hazards.

  7. What is the main advantage of high-voltage direct current (HVDC) transmission over AC for very long distances?

    Answer: HVDC has lower resistive losses and no reactive power charging current on long lines

    HVDC avoids the capacitive charging current and skin effect losses of AC, making it more efficient for bulk power over distances typically exceeding 500–600 miles.