235 Firearm Safety & Handling Techniques Flashcards
7 cards from real ACT practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 7 235 Firearm Safety & Handling Techniques flashcards as text
What is the primary purpose of the holster retention system on a duty holster?
Answer: To prevent unauthorized weapon grabs during a physical confrontation
Retention holsters are designed to resist weapon retention — preventing an attacker from grabbing and using the officer's firearm.
Which of the following best describes 'frangible ammunition' and its Act 235 relevance?
Answer: Projectiles designed to break apart on impact to reduce ricochet risk
Frangible ammunition disintegrates on hard surfaces, reducing ricochet hazards and making it useful in close-quarters or indoor environments.
Before holstering a firearm after use, an Act 235 agent should first:
Answer: Apply the manual safety if one exists and visually scan the area
After use, the agent must visually scan for additional threats and apply the safety before holstering to prevent accidental discharge.
What does the term 'negligent discharge' mean in firearm safety training?
Answer: An unintentional firing of a weapon caused by human error
A negligent discharge is an unintentional firing resulting from a failure to follow proper safety procedures, not a mechanical failure.
When conducting a press check to verify a round is chambered, an agent should:
Answer: Point the firearm at a safe direction, retract the slide slightly and visually/tactilely confirm
A press check involves slightly retracting the slide while pointing in a safe direction to visually or tactilely confirm a round is chambered.
Under Pennsylvania Act 235, firearm qualifications must be completed:
Answer: Annually, with a passing score on the required qualification course
Act 235 certification requires annual firearms qualification to ensure agents maintain proficiency with lethal weapons.
Which condition describes a firearm with a round in the chamber, full magazine, and safety engaged?
Answer: Condition 1
Condition 1 (also called 'cocked and locked' for single-action pistols) means a round is chambered, the magazine is inserted, and the manual safety is on.