ACT 235 235 Firearm Safety & Handling Techniques 4

Question 1

What is the recommended technique for safely handing a firearm to another person?

Accepted Answer

Pass it grip-first with the magazine removed and action open

Answer

Firearms should be passed grip-first with the magazine removed and action open so the recipient can verify it is unloaded.

Question 2

A 'stovepipe' malfunction occurs when:

Accepted Answer

An ejected case becomes trapped vertically in the ejection port

Answer

A stovepipe is a type I malfunction where a spent case is partially ejected and stands upright in the ejection port, blocking the slide.

Question 3

According to Act 235 safety standards, firearms must be inspected for functionality:

Accepted Answer

At the start of every duty shift

Answer

A pre-shift inspection ensures the firearm is clean, loaded correctly, and functioning properly before the agent takes responsibility for security.

Question 4

The 'tap-rack-reassess' malfunction clearance drill is used to address:

Accepted Answer

Failure to fire or failure to eject (Type I/II malfunctions)

Answer

Tap-rack-reassess clears most Type I (failure to fire) and Type II (stovepipe) malfunctions quickly by seating the magazine and cycling the slide.

Question 5

Why should an Act 235 agent avoid 'limp-wristing' when firing a semiautomatic pistol?

Accepted Answer

It can cause malfunctions by not providing enough resistance for the slide to cycle fully

Answer

Limp-wristing — holding the gun with a loose wrist — prevents the slide from cycling fully, causing failures to eject or feed.

ACT Practice Test