Practice Test GeeksACP Autodesk Inventor
← All ACP Flashcard Decks

Coordinate Systems and Precision Drawing Flashcards

7 cards from real ACP practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.

Read the first 7 Coordinate Systems and Precision Drawing flashcards as text

  1. When using Direct Distance Entry, what must you do in addition to typing the distance?

    Answer: Move the cursor in the desired direction before typing the distance

    Direct Distance Entry requires you to move the cursor to visually indicate direction; AutoCAD then uses that direction combined with your typed distance to place the point.

  2. What does the UCSICON command control in AutoCAD?

    Answer: The display visibility, position, and visual properties of the UCS icon

    UCSICON controls whether the UCS icon is displayed, where it appears (at origin or lower-left corner), and its visual style properties.

  3. The NEAREST object snap mode snaps to which location on an object?

    Answer: The closest point anywhere along the object's geometry to the cursor

    The NEAREST snap finds the closest point anywhere on the object's geometry to the cursor position, regardless of special geometric features like endpoints or midpoints.

  4. What does Polar Tracking do when configured to a 45-degree increment?

    Answer: Displays alignment guide paths at 45-degree angle increments to guide cursor movement

    Polar Tracking displays temporary alignment paths at the specified angle increments (every 45° here), visually guiding cursor movement along those directions without hard-constraining the cursor.

  5. Which tool or command is used to manage and restore previously saved named UCSs?

    Answer: UCSMAN

    UCSMAN opens the UCS Manager dialog, which lists all saved named UCSs and allows you to restore, rename, set current, or delete them.

  6. What is the purpose of the Apparent Intersection (APPINT) object snap?

    Answer: Snaps to where two objects appear to cross in the view even if they are at different 3D elevations

    Apparent Intersection snaps to where objects appear to visually cross in the current view, even when they exist at different Z elevations in 3D space and do not actually intersect.

  7. When you type the coordinate 3,4 (without an @ prefix) in AutoCAD, what does it specify?

    Answer: X=3, Y=4 measured from the drawing origin (0,0)

    Without the @ symbol, coordinate input is absolute, so 3,4 means the point located at X=3, Y=4 measured from the world or UCS origin.