ACP Sheet Metal Design 2

Question 1

Which Inventor sheet metal command creates a rolled, cylindrical-style part by revolving an open sketch profile about an axis?

Accepted Answer

Contour Roll

Answer

Contour Roll revolves an open profile around an axis to make rolled sheet metal shapes like cylinders and cones.

Question 2

When you create a Lofted Flange, which output option produces faceted bends that can be made on a brake press?

Accepted Answer

Press Brake

Answer

The Press Brake output splits the loft into faceted bends that a brake press can make, while Die Formed keeps the surfaces smooth.

Question 3

Two flanges meet at a corner but are not joined. Which command extends or trims them to form a seam with a set gap?

Accepted Answer

Corner Seam

Answer

Corner Seam extends or trims adjacent sheet metal faces so they meet at a seam with a controlled gap.

Question 4

Two existing sheet metal faces need to be connected by a bend that does not exist yet. Which command adds it?

Accepted Answer

Bend

Answer

The Bend command adds a bend between two existing sheet metal faces, extending or trimming them as needed.

Question 5

Which of the following is NOT a hem type in the Inventor Hem command?

Accepted Answer

Jog

Answer

The Inventor Hem types are Single, Teardrop, Rolled, and Double, and Jog is not one of them.

ACP Autodesk Inventor