ACP Tube and Pipe Design Flashcards
6 cards from real ACP practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 6 ACP Tube and Pipe Design flashcards as text
What is the function of a 'branch take-off' in Inventor's Tube & Pipe routing?
Answer: A junction where one pipe branches off from the main run at a defined angle
A branch take-off creates a junction where a secondary pipe route branches from the main run, typically at 90° or a specified angle.
Which Inventor Tube & Pipe command generates an isometric drawing of a pipe spool for fabrication?
Answer: Extract Isometric
The Extract Isometric command generates an isometric drawing of a selected pipe spool or route for fabrication reference.
What property in a Tube & Pipe style controls the minimum straight length required before a bend?
Answer: Minimum Leg Length
Minimum Leg Length defines the shortest straight pipe segment required between a fitting or end and a bend location.
When a flexible hose route is selected instead of a rigid route in Inventor, what routing method becomes available?
Answer: Spline routing along a user-defined curve
Flexible hose routes use spline-based routing, allowing the hose to follow a curved path between connection points.
In Inventor's Tube & Pipe module, what does the 'cut length' of a pipe segment represent?
Answer: The pipe length after subtracting engagement into fittings from the total run length
Cut length is the fabrication length of a pipe segment: total run length minus the engagement lengths at each fitting connection.
Which setting in a Tube & Pipe run controls whether inserted fittings automatically resize to match the pipe's nominal diameter?
Answer: Auto Resize Fittings
The Auto Resize Fittings setting, when enabled, automatically adjusts fitting sizes to match the nominal diameter defined for the pipe run.