Practice Test GeeksACP - AutoCAD Certified Professional Practice Test
← All ACP Flashcard Decks

Coordinate Systems and Precision Drawing Flashcards

7 cards from real ACP practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.

Read the first 7 Coordinate Systems and Precision Drawing flashcards as text

  1. What does entering @5<45 as a coordinate in AutoCAD specify?

    Answer: Relative polar coordinates: 5 units at 45 degrees from the last point

    The @ symbol indicates relative (from the last point) coordinates, and the < symbol separates distance from angle in polar format, so @5<45 means 5 units at 45 degrees from the last point.

  2. Which UCS option aligns the coordinate system with a selected face of a 3D solid?

    Answer: Face

    The UCS Face option aligns the XY plane of the coordinate system to a selected planar face of a 3D solid or surface.

  3. Which function key toggles Ortho mode on and off in AutoCAD?

    Answer: F8

    F8 toggles Ortho mode, which constrains cursor movement to horizontal and vertical directions only.

  4. Which coordinate entry method specifies an exact location measured from the drawing origin at 0,0?

    Answer: Absolute Cartesian

    Absolute Cartesian coordinates specify a point's exact X,Y location measured from the fixed drawing origin (0,0), without using the @ symbol.

  5. What does Object Snap Tracking (OTRACK) allow you to do?

    Answer: Track along temporary alignment paths from acquired OSNAP points

    OTRACK displays temporary alignment paths that extend from acquired object snap points, making it easy to place new geometry precisely aligned with existing objects.

  6. What is the purpose of the SNAPANG system variable in AutoCAD?

    Answer: Defines the rotation angle for the snap grid and crosshair cursor

    SNAPANG sets the rotation angle for the snap grid and cursor crosshairs, allowing you to align precision drawing tools with non-orthogonal geometry.

  7. In Dynamic Input, which component displays command prompts and system messages near the cursor?

    Answer: Dynamic Prompts

    Dynamic Prompts is the Dynamic Input component that displays command prompts and responses near the cursor, enabling in-canvas command interaction.