ACP ACP Device Management and Inventory 2 — Questions and Answers
Question 1: How does Auvik handle devices that share the same IP address due to NAT or network overlaps in multi-site environments?
- Each site operates as a separate network context, so duplicate IPs are tracked independently per site (Correct answer)
- Auvik merges all duplicate IP records into one global device entry
- Auvik blocks discovery on any site with overlapping IP ranges
- Auvik requires static IP assignment before discovery can proceed
Correct answer: Each site operates as a separate network context, so duplicate IPs are tracked independently per site
Auvik's multi-site architecture treats each network as an independent context, allowing duplicate IP addresses to coexist across different sites without conflict.
Question 2: What Auvik feature would you use to quickly find all devices of a specific type (e.g., all switches) across a client's network?
- Device type filter in the device inventory list (Correct answer)
- Topology map zoom control
- SNMP credential manager
- Traffic protocol filter
Correct answer: Device type filter in the device inventory list
The device type filter in Auvik's inventory list lets you instantly narrow the view to show only a specific category of device, such as all switches.
Question 3: Which Auvik capability allows MSPs to track warranty and end-of-life status for client network equipment?
- Device lifecycle information in the inventory details panel (Correct answer)
- Automated firmware update scheduler
- Real-time packet capture tool
- BGP route table viewer
Correct answer: Device lifecycle information in the inventory details panel
Auvik can display warranty and end-of-life information within the device inventory details panel, helping MSPs proactively manage aging equipment.
Question 4: In Auvik, how are interfaces on a managed device displayed to help administrators quickly assess their health?
- Each interface is listed with status indicators showing up/down state and utilization (Correct answer)
- Interfaces are shown only in the topology map as colored lines
- Interface data requires manual entry by the administrator
- Interfaces are only visible in SNMP MIB browser output
Correct answer: Each interface is listed with status indicators showing up/down state and utilization
Auvik displays each device interface with real-time status indicators (up/down) and utilization metrics so administrators can quickly assess port health.
Question 5: What is the purpose of the Auvik collector in relation to device inventory discovery?
- It is a lightweight software agent deployed on-site that polls local devices and sends data to Auvik's cloud (Correct answer)
- It is a cloud proxy that manages billing for device licenses
- It is a hardware appliance that stores all configuration backups locally
- It is an SNMP trap receiver installed on the client's router
Correct answer: It is a lightweight software agent deployed on-site that polls local devices and sends data to Auvik's cloud
The Auvik collector is a lightweight on-premises software agent that actively polls local network devices and forwards the collected data to Auvik's cloud platform.
Question 6: In Auvik device management, what is the significance of a device being categorized as 'unmanaged'?
- Auvik has discovered the device via ARP or MAC tables but is not polling it via SNMP for detailed data (Correct answer)
- The device has been permanently deleted from Auvik
- The device has failed all authentication attempts and is quarantined
- The device is a virtual machine not supported by Auvik
Correct answer: Auvik has discovered the device via ARP or MAC tables but is not polling it via SNMP for detailed data
An 'unmanaged' device in Auvik has been detected through passive discovery (ARP/MAC tables) but SNMP credentials have not been applied, so detailed telemetry is not collected.
ACP ACP Device Management and Inventory 2
How does Auvik handle devices that share the same IP address due to NAT or network overlaps in multi-site environments?