Practice Test Geeks(ACE) Airport Certified Employee Practice Test
← All ACE Flashcard Decks

Airport Communications Procedures Flashcards

7 cards from real ACE practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.

Read the first 7 Airport Communications Procedures flashcards as text

  1. What is the meaning of a flashing red light gun signal directed at a vehicle on an airport movement area?

    Answer: Stop

    A flashing red light from the control tower directed at a ground vehicle means stop immediately.

  2. In the context of airport communications, what is a NOTAM?

    Answer: A notice issued to pilots about changes or hazards to flight operations

    A NOTAM (Notice to Air Missions) informs pilots and airport personnel of temporary conditions, hazards, or procedural changes affecting flight.

  3. Which of the following best describes the term 'squawk' as used in ATC communications?

    Answer: Setting a specific transponder code assigned by ATC

    Controllers instruct pilots to 'squawk' a four-digit code on their transponder so radar can identify and track the aircraft.

  4. What radio transmission technique helps ensure clarity on congested airport frequencies?

    Answer: Pausing briefly after pressing the PTT before speaking, then speaking clearly and concisely

    A brief pause after pressing the push-to-talk (PTT) button ensures the radio is transmitting before speech begins, and concise phrasing reduces frequency congestion.

  5. When an aircraft is instructed to 'line up and wait,' what action should the crew take?

    Answer: Taxi onto the runway, align with centerline, and await takeoff clearance

    'Line up and wait' instructs the crew to taxi onto the runway and hold in position without beginning takeoff until a separate takeoff clearance is issued.

  6. What is the significance of the term 'WILCO' in aviation radio communications?

    Answer: The instruction was received and will be complied with

    'WILCO' (will comply) confirms the message was received and understood, and the action will be carried out.

  7. What procedure should airport communications personnel follow when a transmission is received on the wrong frequency?

    Answer: Advise the transmitting station of the correct frequency and attempt to relay if safety is at risk

    Personnel should inform the station of the correct frequency and relay safety-critical information to prevent operational gaps.