Abrasive Wheels Training Certificate Safety Regulations

Question 1

Under the Provision and Use of Work Equipment Regulations 1998 (PUWER), who is legally responsible for ensuring abrasive wheels are properly maintained?

Accepted Answer

The employer

Answer

Under PUWER 1998, the employer has the legal duty to ensure that work equipment, including abrasive wheels, is maintained in an efficient state, in efficient working order, and in good repair. This includes regular inspection and proper training provision.

Question 2

Which regulation specifically requires that a person must be competent and trained before mounting an abrasive wheel?

Accepted Answer

PUWER 1998, Regulation 9

Answer

PUWER 1998, Regulation 9 requires that all persons who use work equipment have received adequate training. For abrasive wheels specifically, only trained and appointed persons should mount wheels. This requirement replaced the old Abrasive Wheels Regulations 1970.

Question 3

The HSE publication 'Safety in the Use of Abrasive Wheels' (HSG17) is which type of document?

Accepted Answer

HSE guidance providing practical advice on compliance

Answer

HSG17 is an HSE guidance document that provides practical advice on how to comply with the law regarding abrasive wheels. While not legally binding itself, following HSG17 guidance is normally sufficient to demonstrate compliance with PUWER and other relevant regulations.

Question 4

Under PUWER 1998, what must an employer provide to employees who use abrasive wheels?

Accepted Answer

Adequate health and safety training specific to the equipment

Answer

PUWER 1998 requires employers to ensure that all persons who use work equipment receive adequate training for purposes of health and safety. For abrasive wheels, this includes training in hazards, correct selection, mounting procedures, and safe operating practices.

Question 5

Which UK regulation requires employers to assess and control risks from hazardous substances such as grinding dust?

Accepted Answer

COSHH 2002

Answer

The Control of Substances Hazardous to Health Regulations 2002 (COSHH) requires employers to assess and control exposure to hazardous substances, including grinding dust. Abrasive wheel operations can generate dusts containing silica, metal particles, and abrasive fragments.

Abrasive Wheels Practice Test

Abrasive Wheels Practice Test

Abrasive Wheels Training Certificate Safety Regulations