Practice Test GeeksABAT - Advanced Burglar Alarm Technician Certified Practice Test
← All ABAT Flashcard Decks

ABAT Communication Systems & Central Station Monitoring Flashcards

6 cards from real ABAT practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.

Read the first 6 ABAT Communication Systems & Central Station Monitoring flashcards as text

  1. When a cellular communicator loses its connection to the cellular network, what should a properly configured alarm system do?

    Answer: Log the event and switch to the backup communication path

    A properly configured dual-path system logs the cellular trouble condition and automatically fails over to the secondary communication path (e.g., IP or POTS) to maintain monitoring.

  2. What is 'line seizure' in the context of alarm communicators using POTS lines?

    Answer: The panel disconnecting all extensions to gain exclusive control of the phone line for dialing

    Line seizure is the communicator's ability to disconnect all phones in the premises and seize the POTS line to ensure the alarm signal is transmitted without interference.

  3. Which central station grade under UL requires the facility to be located in a building with reinforced walls and dedicated backup power?

    Answer: Grade AA

    UL Grade AA certified central stations must meet more stringent physical security and redundancy requirements than Grade A, including reinforced construction and comprehensive backup systems.

  4. In alarm monitoring, what does 'test signal' or 'test report' scheduling accomplish?

    Answer: Verifies that communication between the panel and central station is functioning at regular intervals

    Scheduled test signals (e.g., daily or weekly) confirm that the end-to-end communication path from the alarm panel to the central station is operational.

  5. What is the significance of the SIA DC-09 standard in alarm communications?

    Answer: It specifies IP-based alarm transmission using TCP/UDP protocols

    SIA DC-09 (Internet Protocol Event Reporting) defines how alarm events are transmitted over IP networks using TCP and/or UDP, enabling modern broadband alarm communications.

  6. A central station operator receives a burglary alarm signal and cannot reach the subscriber or any keyholders. What is the standard next step?

    Answer: Dispatch police immediately

    When a verified alarm cannot be resolved through call verification, standard central station protocol is to dispatch law enforcement immediately to protect the subscriber's property.