Workplace Safety and OSHA Standards Flashcards
7 cards from real AARC practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 7 Workplace Safety and OSHA Standards flashcards as text
An automotive recycler notices that several hydraulic lift arms are showing hairline cracks. Under OSHA standards, what is the correct response?
Answer: Remove the equipment from service immediately until inspected and repaired
OSHA requires that defective equipment be removed from service immediately; operating cracked hydraulic lift components creates a serious crushing hazard.
Under OSHA's Hazard Communication Standard, how often must Safety Data Sheets (SDS) be updated when new hazard information becomes available?
Answer: Within 3 months of learning of the new significant information
OSHA 29 CFR 1910.1200(g) requires chemical manufacturers and importers to update SDS within 3 months of becoming aware of new significant hazard information.
Which OSHA standard requires automotive recyclers to develop a written emergency action plan (EAP) if they have 10 or more employees?
Answer: 29 CFR 1910.38
OSHA 29 CFR 1910.38 mandates a written Emergency Action Plan for employers with 10 or more employees, covering evacuation routes and emergency procedures.
What is the OSHA permissible exposure limit (PEL) for lead, a common hazard when cutting or burning vehicle frames in automotive recycling?
Answer: 50 micrograms per cubic meter (μg/m³) as an 8-hour TWA
OSHA 29 CFR 1910.1025 sets the PEL for lead at 50 μg/m³ as an 8-hour time-weighted average, with an action level of 30 μg/m³.
When stacking crushed vehicle hulks in an automotive recycling yard, what OSHA-related concern most directly governs the stacking height and stability?
Answer: Material storage requirements under 29 CFR 1910.176 to prevent collapse
OSHA 29 CFR 1910.176 requires that materials be stored safely to prevent tipping, falling, or collapse, which directly applies to stacking vehicle hulks.
At an automotive recycling facility, a worker experiences symptoms consistent with carbon monoxide poisoning. Which OSHA standard most directly covers this emergency response?
Answer: 29 CFR 1910.38 (Emergency Action Plans) and 1910.151 (Medical Services and First Aid)
An acute CO poisoning event triggers both the Emergency Action Plan (1910.38) for evacuation and 1910.151 for ensuring prompt medical treatment is available.
Under OSHA's Recordkeeping Rule (29 CFR 1904), which type of workplace injury must be recorded on the OSHA 300 Log?
Answer: Any work-related injury requiring medical treatment beyond first aid
OSHA 300 Log recordability is triggered by work-related injuries or illnesses that result in days away from work, restricted work, job transfer, loss of consciousness, or medical treatment beyond first aid.