FREE Dressmaking and Tailoring Fundamentals Questions and Answers

After the design has been conceptualized, the blueprint for the garment is constructed in this process of dressmaking.

Patternmaking

Blueprint designing

Sketching

Garments construction

Correct! Wrong!

This is not a rule to follow while cutting garment components.

Set aside the cut component but do not remove the pins or patterns to keep it ready for marking.

While cutting the fabric, walk around the table.

Save all fabric scraps for future use.

The incorrect side of the material has transfer marks.

Correct! Wrong!

You always have a _______________ while putting up patterns for a pair of men's trouser.

Corner layout

Trial layout

Side layout

Middle layout

Correct! Wrong!

When two pieces of fabric are sewed together, the line formed is known as ________.

Placket

Seam

Patch

Pocket

Correct! Wrong!

It is a pair of scissors used to cut pattern pieces, threads, seams, and buttonholes.

Pinking shears

Pointed scissors

Shears

Seam ripper

Correct! Wrong!

To make an opening at one end of the seam, you must offer a ________.

Pattern

Pocket

Placket

Fastener

Correct! Wrong!

It's the gap between the cutting line and the seam line.

Seam allowance

Layouting

Plain seam

Pinning

Correct! Wrong!

FREE Dressmaking and Tailoring Fundamentals Questions and Answers

After the design has been conceptualized, the blueprint for the garment is constructed in this process of dressmaking.

This is not a rule to follow while cutting garment components.

You always have a _______________ while putting up patterns for a pair of men's trouser.

When two pieces of fabric are sewed together, the line formed is known as ________.

It is a pair of scissors used to cut pattern pieces, threads, seams, and buttonholes.

To make an opening at one end of the seam, you must offer a ________.

It's the gap between the cutting line and the seam line.

FREE Tailor Tools Questions and Answers

FREE Tailor Trainer Questions and Answers

After the design has been conceptualized, the blueprint for the garment is constructed in this process of dressmaking.

This is not a rule to follow while cutting garment components.

You always have a _______________ while putting up patterns for a pair of men's trouser.

When two pieces of fabric are sewed together, the line formed is known as ________.

It is a pair of scissors used to cut pattern pieces, threads, seams, and buttonholes.

To make an opening at one end of the seam, you must offer a ________.

It's the gap between the cutting line and the seam line.

Premium Tests $49/moFREE April-2024

Premium Tests $49/mo
FREE April-2024