Construction Test 1

The soil's bearing capacity cannot be increased by

Making sand heaps

Watering the soil's surface

Ramming dirt with crushed stone

Removing subsurface water

Correct! Wrong!

When drilling in ________, rotary drilling is the fastest method.

Clay soils

Sandy soil

Rocky soils

All of these

Correct! Wrong!

For beams and slabs, concrete slump should range from ________.

30 to 125 mm

40 to 100 mm

35 to 125 mm

45 to 100 mm

Correct! Wrong!

If the soil is _______, a pile foundation is typically offered.

Made up

Soaked in water

Compressible

All options are correct

Correct! Wrong!

For spans, couple roof is used.

less than 8 m, but 6.5 m

6 to 6.5 m but not less than

less than 3.5 m

less than 5 m, but 2.5 m

Correct! Wrong!

A cross joint is _______ to the plumb line when it is aligned.

Vertical line

Bed block

Perpendicular

Lintel

Correct! Wrong!

________ are the best kind of piles for soft soil with little resistance to the flow of concrete.

Franki pile

Raymond pile

Vibro pile

Simplex pile

Correct! Wrong!

Choose one of the following to represent the false statement:

Before making lime mortar, lime should be slaked.

The walls are pointed with lime surkhi mortar.

The only purpose of adding cement to lime mortar is to improve its hydraulic qualities.

Concrete with a high early strength is typically utilized in cold climates.

Correct! Wrong!

_______ is a protruding element that is typically used to support a truss.

Frieze

Cornice

Lintel

Coping

Correct! Wrong!

The depth of soil exploration for large embankments and dams should not be less than _______.

1/2 h

2 h

h/4

h/8

Correct! Wrong!

Only after ____ days may the formwork on the underside of the slabs be removed.

Correct! Wrong!

Construction Test 1

The soil's bearing capacity cannot be increased by

When drilling in ________, rotary drilling is the fastest method.

For beams and slabs, concrete slump should range from ________.

If the soil is _______, a pile foundation is typically offered.

For spans, couple roof is used.

A cross joint is _______ to the plumb line when it is aligned.

________ are the best kind of piles for soft soil with little resistance to the flow of concrete.

Choose one of the following to represent the false statement:

_______ is a protruding element that is typically used to support a truss.

The depth of soil exploration for large embankments and dams should not be less than _______.

Only after ____ days may the formwork on the underside of the slabs be removed.

Construction Test 3

Construction Test 2

Construction Test 5

Construction Test 6

Construction Test 4

The soil's bearing capacity cannot be increased by

When drilling in ________, rotary drilling is the fastest method.

For beams and slabs, concrete slump should range from ________.

If the soil is _______, a pile foundation is typically offered.

For spans, couple roof is used.

A cross joint is _______ to the plumb line when it is aligned.

________ are the best kind of piles for soft soil with little resistance to the flow of concrete.

Choose one of the following to represent the false statement:

_______ is a protruding element that is typically used to support a truss.

The depth of soil exploration for large embankments and dams should not be less than _______.

Only after ____ days may the formwork on the underside of the slabs be removed.

Premium Tests $49/moFREE November-2024

Premium Tests $49/mo
FREE November-2024