Construction Test 4

_______ support loads partially by friction and partially by resting on hard strata.

Friction bearing pile

Rough pile

Bearing pile

Friction pile

Correct! Wrong!

_______ refers to the opening in a sloping roof whose top is parallel to the roof surface.

Lantern window

Louvered window

Sky light window

Dormer window

Correct! Wrong!

Causes of dampness

Soil solidification

Paint whitening

Efflorescence

All of the options are incorrect

Correct! Wrong!

A minimum 15 cm cover is supplied on the ______ in grillage foundations.

Exterior beams' ends

The outside beams' ends

Lower beam of lower tier

All options are incorrect

Correct! Wrong!

______ are those that are installed in flat roofed rooms.

Sky window

Lantern window

Dormer window

Louvered window

Correct! Wrong!

The capacity of granite to support weight is typically _________.

30 to 35 kg/cm²

15 to 20 kg/cm²

40 to 45 kg/cm²

42 to 46 kg/cm²

Correct! Wrong!

When examining the area, it is discovered that a large layer of very firm clay sits on top of a thick layer of soft clay. The following kind of foundation is helpful in this circumstance:

Grillage foundation

Raft foundation

Pile formation

All of the options are incorrect

Correct! Wrong!

A brick known as a _______ is typically used at the end of a course of bricks to stagger vertical joints in succeeding courses of a wall.

Stretcher

Closer

Header

Bat

Correct! Wrong!

The landing's minimum width should be

A width of stairs that is halved

Equivalent to the stair width

Stair width twice as wide

Equivalent to the stair width

Correct! Wrong!

The Auger boring technique is inappropriate for _______.

Vary soft soil

Really tough soil

Concrete soil

All of the options are correct

Correct! Wrong!

An existing structure's stability could be compromised by _______.

Mining nearby.

The tremors brought generated by traffic movements

Increasing water table

All of the options are correct

Correct! Wrong!

_______ support loads partially by friction and partially by resting on hard strata.

_______ refers to the opening in a sloping roof whose top is parallel to the roof surface.

Causes of dampness

A minimum 15 cm cover is supplied on the ______ in grillage foundations.

______ are those that are installed in flat roofed rooms.

The capacity of granite to support weight is typically _________.

When examining the area, it is discovered that a large layer of very firm clay sits on top of a thick layer of soft clay. The following kind of foundation is helpful in this circumstance:

A brick known as a _______ is typically used at the end of a course of bricks to stagger vertical joints in succeeding courses of a wall.

The landing's minimum width should be

The Auger boring technique is inappropriate for _______.

An existing structure's stability could be compromised by _______.

Construction Test 2

Construction Test 6

Construction Test 1

Construction Test 3

Construction Test 5

_______ support loads partially by friction and partially by resting on hard strata.

_______ refers to the opening in a sloping roof whose top is parallel to the roof surface.

Causes of dampness

A minimum 15 cm cover is supplied on the ______ in grillage foundations.

______ are those that are installed in flat roofed rooms.

The capacity of granite to support weight is typically _________.

When examining the area, it is discovered that a large layer of very firm clay sits on top of a thick layer of soft clay. The following kind of foundation is helpful in this circumstance:

A brick known as a _______ is typically used at the end of a course of bricks to stagger vertical joints in succeeding courses of a wall.

The landing's minimum width should be

The Auger boring technique is inappropriate for _______.

An existing structure's stability could be compromised by _______.

Premium Tests $49/moFREE April-2024

Premium Tests $49/mo
FREE April-2024