313A Piping, Brazing & Leak Detection 2

Question 1

Which refrigerant leak detection method offers the highest sensitivity, capable of detecting leaks as small as 0.1 oz per year?

Accepted Answer

Electronic refrigerant leak detector

Answer

Electronic leak detectors (heated diode, infrared, or heated pentode types) are capable of detecting trace levels of refrigerant far below the threshold of bubble or UV dye methods.

Question 2

Under Canadian federal refrigerant regulations, technicians must repair leaks in systems with a refrigerant charge above what threshold within 30 days of detection?

Accepted Answer

Systems with a charge above 3 kg

Answer

Under Canada's Ozone-depleting Substances and Halocarbon Alternatives Regulations (CEPA), systems containing more than 3 kg of refrigerant must have detected leaks repaired within 30 days.

Question 3

When pressure testing a refrigerant system, dry nitrogen is preferred over refrigerant because:

Accepted Answer

Nitrogen is inert, non-toxic, non-flammable, and leaves no residue in the system

Answer

Dry nitrogen is the preferred test medium because it is inert, poses no environmental risk, carries no oil contamination risk, and does not condense at test temperatures.

Question 4

UV dye leak detection requires which additional piece of equipment to be effective?

Accepted Answer

A UV (black light) lamp and UV-filtering safety glasses

Answer

UV fluorescent dye only becomes visible when illuminated by an ultraviolet (black light) lamp, and UV-filtering glasses enhance contrast to reveal even faint traces of dye.

Question 5

A nitrogen standing pressure test is held at 200 psig. After 60 minutes the gauge reads 192 psig with no change in ambient temperature. What is the most likely explanation?

Accepted Answer

A leak exists somewhere in the system

Answer

Nitrogen does not condense or absorb into oil under normal conditions, so any measurable pressure drop during a standing test at constant temperature indicates a leak.

Red Seal HVAC 313A Practice Test

Red Seal HVAC 313A Practice Test

313A Piping, Brazing & Leak Detection 2