Woodworking Safety Rules - Practice Test Geeks

To the left of the blade at least 3'

Just across from the blade

Depending on whether the cut has been finished, slightly to the left or right of the blade.

None of the above

Correct! Wrong!

As soon as the saw has totally stopped.

Your choice of blade will affect this.

After the table's fencing has been taken down.

As the saw is running

Correct! Wrong!

Greater than 1"

Roughly 1/4"

Around 1 to 2"

Correct! Wrong!

As the chuck key is put into the chuck, turn the machine on.

Before using, use the chuck key to tighten the pieces.

Only use your hands to tighten the bits in the chuck.

All of the above

Correct! Wrong!

4 inches

12 inches

10 inches

6 inches

Correct! Wrong!

Tool apron

Fit clothes

Protective eyewear

Slippers

Correct! Wrong!

You always make sure there is at least one square face and edge.

Do not attempt to cut too quickly; instead, let the blade do the work.

Between the board and the fence, there is no gap.

All of the above

Correct! Wrong!