Class C CDL with Hazmat Endorsement Practice Test -3
If you renounce your United States citizenship, you will ______.
If you renounce your United States citizenship, you will be denied a hazardous materials endorsement.
During the basic vehicle control portion of the skills test, you will be asked to __________.
During the basic vehicle control portion of the skills test, you will be asked to move your vehicle forward, back and turn it within a defined area.
_______ are required of all drivers applying to take the CDL test.
The general knowledge test are required of all drivers applying to take the CDL test.
What is the minimum number of days you can lose your CDL if you have committed your first violation of an "out-of-service order"?
The minimum number of days you can lose your CDL if you have committed your first violation of an "out-of-service order" is 90 days.
If you have committed three serious traffic violations within a three-year period involving a CMV, you will likely lose your CDL at least _______ days.
If you have committed three serious traffic violations within a three-year period involving a CMV, you will likely lose your CDL at least 120 days.
The suspension system ________.
The suspension system holds up the vehicle and its load.
Which of the following is a reason why it is recommended for drivers to keep both hands on the wheel?
Keeping both hands on the wheel allows you to turn quickly and could potentially help you avoid a crash.
A passive railroad-highway crossing ________.
A passive railroad-highway crossing does not have any type of traffic control device.
Every ____ miles (or every three hours, whichever comes first), you should make sure the cargo is secure.
Every 150 miles of your trip you should make sure the cargo is secure.
If you are driving in very hot weather, it's a good idea to check your tires every ______.
If you are driving in very hot weather, it's a good idea to check your tires every 2 hours.
For commercial drivers, what does GCW stand for?
For commercial drivers, GCW stands for Gross Combination Weight.
If you are transporting a load that is over-length, over-width or overweight, you may need to ________.
If you are transporting a load that is over-length, over-width or overweight, you may need to obtain a special transit permit and special equipment i.e. "wide load signs" and or flashing lights. You may also need to drive and transport your vehicle at specified times of day.
What is the purpose of a front-end header board?
A front-end header board protects you from your cargo in case of a crash or emergency stop.
Why are false bulkheads sometimes necessary and typically beneficial for drivers transporting livestock?
Because livestock can move around in a trailer, causing unsafe handling, false bulkheads can keep the livestock bunched together and potentially prevent unnecessary movement and loss of control in your tractor or trailer.
The Gross Combination Weight is________
The Gross Combination Weight is the total weight of a powered unit, plus trailer(s), plus the cargo.
Shippers put a hazard warning label on all packages of hazardous materials. On most packages the hazard warning label is what shape?
Shippers put a hazard warning label on all packages of hazardous materials. On most packages the hazard warning label is diamond-shaped.
The carrier of hazardous materials is responsible for ________.
The carrier of hazardous materials is responsible for taking the shipment from the shipper to its destination.
Entries in the Hazardous Materials Table are shown in what order?
Entries in the Hazardous Materials Table are shown in alphabetical order.
After you deliver a hazardous waste shipment, you should ______.
After you deliver a hazardous waste shipment, you should keep your copy of the manifest.
Where must emergency response information be kept?
Emergency response information must be kept in the same location as the shipping papers.
All versions of the Class B Pre-trip inspection tests will include ________.
All of the inspection tests will include an engine start and an in-cab inspection.
Your mirrors and windshields should be devoid of _____.
Your mirrors and windshields should be devoid of cracks, dirt and illegal stickers.
The minimum tread depth for steering axle tires should be _____.
The minimum tread depth for steering axle tires should be 4/32.
To perform a proper inspection of suspension mounts, you need to ______.
To perform a proper inspection of suspension mounts, you need to look for cracked spring hangers, check for missing bolts and inspect the mounts at each point where they are secured to the vehicle frame and axle[s].
Which of the following is emergency equipment you should carry with you at all times?
You should carry fire extinguishers, warning devices for parked vehicles and spare electrical fuses (if the vehicle uses them).
