Solidworks Test 2
At an edge or corner, to eliminate a straight, symmetrical sloping surface.
Explanation:
SolidWorks chamfer tool is a helpful tool in Solidworks CAD software that allows you to cut (45 degree angle with normal surface) or straighten edges or corners of 3D models. The Solidworks fillet tool can be used to round corners.
Three conventional viewpoints of a drawing
Explanation:
Under Insert > Drawing View, the Standard 3 View option provides three related default orthographic (front, right, left, top, bottom, and back) views of a part or assembly that are displayed at the same time. The view orientations utilized in the part or assembly are determined by the orientations (Front, Right, and Top).
An object built in SolidWorks must be converted to a _______ file before it can be 3D printed.
Explanation:
A triangulated approximation of a 3D CAD model is an STL file. The degree of triangulation in the STL file determines how faceted the part's surface appears after printing. When there aren't enough triangles in a circle, it creates a stop sign.
Tool for notating and modifying measurements.
Explanation:
Another essential sketch feature in SolidWorks is "Smart Dimension," which allows you to fix or modify the dimension of a drawn part based on your idea or paper drawing. The Smart Dimension tool is located in the sketch toolbar manager, and it aids in notating the dimensions of the designed part or products in accordance with engineering graphics rules.
This view allows you to examine the assembly as if you were cutting it open with a saw.
Explanation:
A Section View is a SolidWorks evaluation tool that makes a temporary cut in a model to provide for a better view of other areas. The section view isn't restricted to a planar cut, and more complicated sections can be quite useful.
Communicates the size of the object
Explanation:
The model is linked to the dimensions in a SOLIDWORKS drawing, and changes in the model are reflected in the drawing. Dimensions of the model: Typically, dimensions are created as part features are created, and then those dimensions are included in the various drawing views. Changing a model dimension updates the drawing, and changing an added dimension changes the drawing.
This is a file that allows you to merge parts.
Explanation:
Subassemblies are complex assemblies made up of multiple components, which can be parts or other assemblies. Component behavior is similar for both types in most operations. When a component is added to an assembly, it establishes a connection between the assembly and the component.
___________ are circles with the same centerpoint.
Explanation:
Concentric circles have the same or a similar center. Concentric circles, in other words, are defined as two or more circles that share the same center point.
How many profiles does a loft feature require?
Explanation:
A minimum of two profiles is required, but a larger number enables for more complicated designs to be created. Although closed profiles are preferred, Thin Feature Lofts can be built.