NEC Practice Test


National Electrical Code – NEC Practice Test


The National Electric Code (NEC), often known as NFPA 70, is a standard for the safe installation of electrical wiring and components in the United States of America. The National Fire Protection Association (NFPA), a private trade association, publishes the National Fire Code series. It is not a federal law, despite the usage of the term “national.” States and municipalities usually adopt it in order to standardize their enforcement of safe electrical practices. In other circumstances, the NEC is amended, altered, or even rejected in favor of regional regulations approved by local governments.

A thorough comprehension of the code is required for acquiring a license to perform electrical work. Almost every license exam will include a subject on the NEC code. The National Electrical Code is not a book to read right before the exam. The best way to learn the NEC Code is to do it in a group setting (group study) and by taking a variety of practice examinations. The National Electrical Code (NEC) is not to be confused with the National Electrical Safety Code (NESC) published by the Institute of Electrical and Electronics Engineers (IEEE). Electric power and communication utility systems, such as overhead lines, underground lines, and power substations, are all covered by the NESC.

Review and Take the NEC Practice Test Now!

NEC Code Chapters

NEC Code consists of 9 chapters each dividing into four groupings:

General Requirements; Specific Requirements; Communications Systems and Tables

Chapter 1: General
Chapter 2: Wiring and Protection
Chapter 3: Wiring Methods and Materials
Chapter 4: Equipment for General use
Chapter 5: Special Occupancies
Chapter 6: Special Equipment
Chapter 7: Special Conditions
Chapter 8: Communications Systems
Chapter 9: Tables – Conductor and Raceway Specifications

How to pass NEC Test?

For you to pass the NEC exam, here’s the 5 tips to take:

1. Start early

       – Register for the electrician license exam and start studying. The sooner you begin studying, the greater your chances to pass. You should plan on spending a total of 60 hours studying time for the electrician exam. If your exam is scheduled for a month from now, that means you need to take about 15 hours each week to study. Studying works best when it is spaced, so try to spend at least 2 hours each day preparing. Do not procrastinate and wait until the last minute to cram.

2. Learn the Code

       – The National Electrical Code might be difficult to comprehend at times. You must understand how the Code is structured (Chapters, Articles, Parts, sections.) You will fail your electrical exam if you do not understand how to use the Code. To seek up sections, use the index in the back of the NEC. During the exam, don’t randomly browse through the book looking for answers. Before answering a question, look for the Code section. Match the question’s wording to the Code section.

3. Save Time

       – Don’t waste time studying stuff that won’t be on the electrician exam; only study what will be on the exam! Electrical Exam Prep Online provides you with questions that are likely to appear on the exam. Concentrate on the code calculations. Saving time also entails prioritizing your weaker areas. You can study other areas first if you have a lot of experience with motors and are confident answering questions about it. During the exam, you can save time by answering questions you already know first and then returning to the difficult ones afterwards.


4. Learn the Technology

       – If you don’t have a lot of computer skills, the actual online electrical exam will be highly stressful for you. Using a computer to practice is an important part of your learning routine. Because the exam is timed, you’ll need to practice on the computer to ensure you’re answering questions correctly. Taking a timed, computer-based practice test will be quite beneficial; you will be able to track your progress and get a sense of how the real electrical exam would feel.

5. Keep your cool

       – Before the electrician exam, have a good night’s rest. This will allow you to remain calm and relaxed throughout the exam. Make a list of the items you’ll need to bring to the testing center, and don’t forget to bring your ID. Arrive early for the electrician test to select a comfortable seat in a convenient place. DO NOT FREAK OUT – it will simply make things worse.