Insole

How to Choose The Right Insole

Best Insoles

A shoe insole is a removable device that is placed inside a shoe to provide additional comfort to the foot. Among other things, it can help relieve pain and improve the look of a shoe. It can also help treat common foot problems like plantar fasciitis. An insole can also be used to provide arch support and height enhancement.

Free Insole Practice Test Online

Insole Question and Answers

Custom orthotics are pricey, ranging in price from $200 to $800, not including the accompanying doctor visits. A comprehensive foot examination, getting a cast of your foot, making your orthotics, and having them fitted are all steps in the process of making custom orthotics.

Warm water and a light detergent should be used to wash shoes and insoles. Dish soap and liquid laundry detergent both work well. To remove filth and grime, use an old toothbrush or a shoe brush. Shake off any extra water after thoroughly rinsing your shoes and insoles.

Also known as “foot beds” or “inner soles” at times. To provide additional comfort, warmth, and a better fit, insoles are bits of material that go inside your shoes or boots.

Take off the insoles and laces. Memory foam insoles could deteriorate in the washer and laces might get twisted. Because powdered detergent might irritate skin, only use a small amount. To increase durability and avoid shrinking or warping, set the washer to the delicate cycle with just cold water. Your shoes should not be dried in the dryer. Keep them out of direct sunlight to prevent bleaching or fabric damage while drying them indoors or outdoors.

Warm water and a light detergent should be used to wash shoes and insoles. Dish soap and liquid laundry detergent both work well. To remove filth and grime, use an old toothbrush or a shoe brush. Shake off any extra water after thoroughly rinsing your shoes and insoles.

Inserts can either help or hurt your lower body, depending on what you’re wearing them for and why.

You may readily get insoles in the shops and malls nearby.

Yes. Hey dude typically has removable and interchangeable insoles. Its insoles are entirely made of recycled fibres. As a result, intensive cleaning might be necessary.

The majority of Dr. Scholl’s® orthotics and insoles are made to last six (6) months when used frequently. Within this time span or at the first indication of wear, they should be changed.

The reason why over-the-counter inserts don’t last as long as orthotics is because they are mass-produced and not tailored to order. Your inserts should last between 6 and 12 months on average, but if you wear them frequently, especially for running, they may last shorter.

Once you’ve outlined the contours of both feet, mark the ends of your longest toe and your heel with a straight line in the middle. The length of your insole is the space between them.

To find retailers in your area, visit the Powerstep store locator. PowerStep Insoles are also available online. The Total Satisfaction Guarantee of PowerStep does not apply to products bought from unlicensed resellers.

To find retailers in your area, visit the Superfeet store locator website. Additionally, you can use the Superfeet insole finder and shop for insoles online.

To make your shoes smell better the next day, stuff some dryer sheets inside of them. They’ll leave behind a scent to cover up the stink and assist neutralize it.

You might try steaming the interior of the shoe to get rid of any bacteria if the material is appropriate for your shoes. Use a handheld steamer, the kind made for cleaning upholstery and removing wrinkles from clothing. Before donning the shoes, give them time to completely dry. Suede shoes shouldn’t be cleaned with this technique because it can harm them.

The odor-eating power of charcoal is unmatched. Just stuff an activated charcoal-filled sock into your shoes for the night. The fragrances will be absorbed by it, keeping them fresh.

Non-removable insoles can also be cleaned using baking soda. Simply sprinkle it into your shoes, let it sit for the evening, and shake off the extra the next day. Before wearing the shoes, let them breathe for a bit.

Another excellent product for absorbing unpleasant odors is cat litter. Place a tiny cloth bag or a thin sock with some clean kitty litter inside. Your insoles will stop smelling if you leave it in your shoes overnight.

If the insole is evidently glued on, heat up a hair dryer to high heat and aim the stream at the interior of the shoe, directly beneath the insole. The glue will be loosened by the heat. Put a flat screwdriver below the insole if it is obvious that the insole was tacked on to remove the tacks.

Most Spenco insoles are available for purchase on their own website and other reliable online retailers across the country.

Up to 12 months or 500 miles, whichever comes first, of dependable comfort and support are guaranteed.

Check the insole of the shoe to check if it is glued or if it is not. Insert the new insole and check to see if it fits snugly from the front to the heel depending on what you discover. If it doesn’t, you might have to trim the edges of it to make sure it conforms correctly. To see if the insoles have made the shoe excessively tight or not, slide your foot inside it.

The ideal plantar fasciitis shoe inserts should include a deep heel cup for shock absorption, strong, structured support, and an arch height that matches your own. This includes Physix Gear Sport Full Length Orthotic Inserts, Dr. Scholl’s Plantar Fasciitis, and Superfeet Green Professional-Grade High Arch Inserts. However, it always depends on how you plan to use it, whether for exercise, walking, etc.

The insole that meets your needs is the “best” insole. Consider the arch type, foot problems, insole placement, and material before making the first one you see.

Unless otherwise instructed in the care instructions, wash your insoles by hand. Your insoles can become waterlogged after being machine washed, in which case drying could take several days.

Although an insole may not perform as stated in terms of changing angles or alignment, it will alter the initial force, which may lead to changes in the user’s experience, either for the better or worse.

In the majority of cases, we advise removing the insole, or footbed, from your shoes and switching it out for your personalized foot orthotics. Most shoes that are orthotic-friendly include a removable footbed so your custom foot orthotics can fit comfortably within.

If the shoe is still cozy and doesn’t feel excessively tight, Dr. Scholl’s® insoles and orthotics can be worn over the existing insole. Any partial-length insole or orthotic should be layered over the insole of your shoe.

Good Feet Arch Supports are normally between $200 and $500 each pair, though prices might vary. They can be purchased separately as pairs or more expensively as a 3-Step System with many pairs.

Make the heel of the shoes tighter. Installing padded heel inserts in the back of your shoes will stop your heels from slipping out of them.

Take a look at shoe insoles. By slipping soft foam toe inserts into the tops of your shoes before putting your foot inside, you can instead cushion shoes at the toe rather than the heel. 

Put on thicker socks. Shoes that are too big might also be fixed by donning thicker socks. It’s a really straightforward concept that works great for boots, sneakers, and other closed-toe shoes.

There is no quick fix. Some suggested using bare hands, peeling the insoles as gently as possible, then scraping them out with a better knife. It will be beneficial to watch the tutorial guide as well.

Remove the insoles and laces before using a gentle brush or a towel to remove any remaining dirt. Put the shoes on the wool/delicates cycle of the washing machine (cold water). For optimal results, hand cleaning the insoles in a linen bag is advised. Avoid using bleach at all costs and instead use a mild detergent.

Overpronation (flat feet) insoles don’t have a defined category, but starting by looking for flexible materials is a smart place to look. This includes the Dr. Scholl’s Extra Support Insoles, the Spenco Total Support Max Shoe Insole, and the Powerstep Pinnacle Pink Maxx Cushion Insole.

The greatest insoles for standing all day will guarantee the gentlest possible treatment for your feet. This includes Dr. Scholl’s Work Insoles, Easyfeet Arch Support Insoles, and PowerStep Pinnacle Arch Support Insoles.

You can get Noene insoles from their official websites, as well as from authorized online retailers operating across the country and stores nearby.

Always consider your needs first. Sure it is worth it, if you truly believe you need it. For the best results, custom orthotics are tailored specifically on your individual body and offer the support and relief that are practically impossible to find with over-the-counter treatments.

FSA Qualification. With a flexible spending account (FSA), health savings account (HSA), or health reimbursement agreement, insoles are eligible for reimbursement (HRA).

Yes, it’s possible to remove the insoles and change them.

Yes, you can layer insoles on top of one another, but some custom orthotics need to be used without the shoe insoles first.

With simply a fresh set of insoles, you can restore a pair of worn-out Uggs. From the Ugg website, place a replacement insole order. Check your Ugg boots again and select the right insole and size if necessary because not all Ugg boot designs have removable insoles.

Regarding their product, VKTRY received a lot of favorable reviews. The more force you can exert on the ground, the faster you can run and the higher you can jump, according to the VKTRY insole. In order to increase speed, increase vertical jump, and improve energy economy, VKs are “dynamic sports gear” that is specifically made to store an athlete’s lost energy and then direct it toward the ground.

Use the right tool for the kind of adhesive bonding the insole to the shoe. For instance, if it’s obvious that the insole is glued on, turn a hair drier on high heat and aim the stream directly into the interior of the shoe, right where the insole is. The glue will be loosened by the heat.

On the underside of the distal end of the orthotic, apply moleskin or duct tape. The tape stops the squeak by lowering the friction between the orthotic and the insole. Simply placing a dryer sheet underneath the item will stop the squeak and fragrance your running shoes at the same time.

Dr. Scholl’s Ultra Thin Massaging Gel Insoles, Powerstep SlimTech 3/4 Length Orthopedic Foot Insoles, and Physix Gear Sport Full Length Orthotic Inserts are three of the best options.

Once you’ve outlined the contours of both feet, mark the ends of your longest toe and your heel with a straight line in the middle. The length of your insole is the space between them.

Superfeet Green Insoles, Spenco Polysorb Cross Trainer, and Powerstep Pinnacle Arch Support Insoles are the top insoles, according to a podiatrist.

According to great customer reviews, Dr. Scholl’s insoles are excellent at giving support, which over time will lead to pain relief and save you and your feet time and money.

Insoles can offer much-needed pain alleviation for foot, ankle, and leg problems in addition to a number of other advantages aimed at aligning the feet into a healthy position when standing, running, and walking.

Yes. Take off the Dansko footbed from your shoes. Insert the half-sole into the shoe’s front, then firmly press it in place. Replace your replaceable footbed once the sole has been appropriately positioned. Your foot will be comfortably fit by the insert.

Yes. The company’s official website and reliable online retailers both sell insoles.

Yes, though some have insoles that are made of cloth at the front and leather at the back.

Insoles are not available from Nike.

Any regular insole you can get at your neighborhood retailers, like sporting goods or retail stores, will fit Skechers sneakers. At this time, they don’t stock or sell replacement insoles.

Even while wearing orthotics, always purchase shoes that suit your feet. You do not need to purchase larger shoes to fit your orthotics if your footwear was made to function with a bespoke orthotic device.

Insoles can offer much-needed pain alleviation for foot, ankle, and leg problems in addition to a number of other advantages aimed at aligning the feet into a healthy position when standing, running, and walking.

Since foot orthotics help correct how the feet articulate on the ground, which in turn can affect the body’s overall posture and stride, they may benefit back pain patients.

Insoles are helpful to make shoes smaller by occupying additional room in footwear that is a little on the large side, despite the fact that they are frequently designed to help with posture issues and other pain. If your shoes are too big over the length of your foot, full insoles are a great solution.

Although insoles don’t actually reduce the size of a shoe, they do fill the space within that is left between your feet. Because they can be taken out and cleaned, insoles are another way to keep shoes smelling fresh. Additionally, they can be used in conjunction with toe inserts to give support when shoes are too wide.

If the shoe is still cozy and doesn’t feel excessively tight, Dr. Scholl’s® insoles and orthotics can be worn over the existing insole.

Depending on body weight and load, the dynamic midfoot bridge is intended to have a service life of at least 800-1200 km.

After two years from the first use, or sooner if they are heavily used, replace the insoles. It is best to let the insole air out after each use, if at all feasible.

• Sit in front of you and place your footwear. Slowly cut the insole’s edges using your sharp tool. Be careful to avoid causing any harm to the boot’s lining or hair.
• Take the brand-new insole out of the packing.
• Carefully trim the edges of the insole using your sharp item.
• If the insole appears to be loose, carefully pull it out. Take out the old insole.
• Look for any damage inside by checking. After being given an all, insert your new insole, front first and heal last, into the boot. To keep it flat in the boot, push down firmly.

Pour vinegar into a flask and mix in water to make it more diluted. After a little soaking, remove the towel from the mixture. Then apply this cloth to the footbed of the sandal where there are stains. On regions that are heavily soiled with filth, vigorously rub with this cloth. The stains will gradually disappear, becoming lighter as they do so. Avoid cleaning your footbeds. Let them air dry outside instead. Leave overnight in a tidy, dry location. They can be used once after being put away for a whole day.

Soak the insoles for a couple of hours in a solution made of two parts vinegar and one part hot water. Because vinegar is a natural disinfectant, it will work to eliminate any bacteria that may be hiding in the shoes.

You can clean suede footbed sandals with fine-grit sandpaper if you wear them. To remove the tenacious dirt and stains, simply softly scrape the sandpaper in small circular strokes.

Angle the bottom of the insole at a 30° to 40° angle toward the interior of the shoe before inserting it. The insole ought to fit comfortably after that.

• Remove all materials currently inside the shoe, including the insole. The best results are achieved when new inserts are laid flat on the shoe’s sole. The new insole should not have anything on top of it since otherwise they won’t function properly.

• Place the old insole on top of the new one, lining up the edges on the heel and arch sides, and draw a circle around it. Place the shoe on top of the new insert and draw a circle around it if the shoe is empty of an insole.

• Take a pair of scissors and gently cut along the line that was traced. The insert shouldn’t be too little to go inside the shoe or too huge to fit incorrectly, so make sure to remain as near to the markings as you can.

• Insoles should be glued into shoes. Apply an adhesive substance to the surface of the inside of the shoe and the bottom of the insole, such as Shoe Goo or Cobbler’s Cement. Place the insole into the shoe after letting it sit for about two minutes to give both surfaces time to adhere to one another. Make sure the insole is flat and has no protruding parts by pressing down. Before donning the shoes, give the bonds 24 hours to seal.

Baking soda can kill microorganisms and eliminate odors. A big plastic bag should contain one to two tablespoons of baking soda. After that, add the insoles to the bag and shake it. Make sure to cover the insoles completely with the baking soda.

• Eucalyptus oil should be applied to a piece of paper towel. Natural eucalyptus oil is made from the eucalyptus tree’s leaves. It is renowned for its ability to dissolve things and won’t affect leather or any other material used to make shoes.

• Using a paper towel soaked in eucalyptus, dab the price sticker until it becomes pliable.

• Pull the sticker out of the fabric of the shoe’s interior. It should be effortless to remove. Continue soaking the sticker in the eucalyptus oil until it comes off easily if it doesn’t.

• To get rid of any last bits of sticky residue, wipe the inside of the shoe with the paper towel that has been soaked in eucalyptus.

• Soak a paper towel in in tap water.
• To get rid of any eucalyptus oil, wipe the inside of the shoe with the moist paper towel.

• Place the footwear outside to dry and let the eucalyptus oil odor fade.

Place your shoes and insoles in the washer. Use the delicate cycle, cold water, and a mild detergent. Please avoid using heat; always allow your shoes and insoles to air dry.

You may get orthotics insoles in local shops and trustworthy online retailers across the country.

Happy Feet insoles can be purchased nationwide from reliable online retailers as well as their own website.

You can get memory foam insoles from trustworthy online retailers located all across the country, including perhaps those nearby to you.

In fact they do. Thus, you may still enjoy the trendy appearance and feel of a Ugg boot while also gaining the extra comfort and security of a custom insole. It’s crucial to keep in mind that not all of their products currently have this capability, so please be aware of that.

Yes. These copper insoles are suited for just about everybody thanks to their straightforward design. They may be inserted into almost any type of shoe and continue to function while you are wearing socks, stockings, or tights. Even persons who have pacemakers can wear it.

Dr. Martens shoes include detachable insoles. Taking out the insoles is a simple and easy approach to offer your feet more room while breaking in your boots. This will also allow you to wear your new boots for an extended amount of time. After you’ve broken in your shoes, you may always replace the insoles.

Jordan 1 insoles are glued making it hard to remove them.

You don’t require insoles if you’re not feeling exceptionally severe pain in your feet, joints, or lower body while running. Similarly, orthotics are unnecessary if you don’t have any severe problems with your feet or stride that can’t be rectified by coaching your form.

The Arch Fit series of footwear includes a removable, supportive cushioning insole system for a more pleasant walking experience.

The Spenco RX Insoles are suitable for people who have plantar fasciitis or arch pain and need reliable arch support. The gel heels also absorb shock to alleviate soreness, and the deep heel cup aids in foot stability while walking.

If you have foot pain but don’t want to see a podiatrist, Superfeet is a fantastic brand of insoles to try. Obviously, if you’re in chronic pain, seeing a doctor is the best option, but if you’re looking for some quick relief and comfort, Superfeet is a good place to start.

They are an interesting product. They are intended for people who want to jump higher or run faster.

Sure, you could just slip on some store-bought insoles and go, but a good cobbler can make totally personalized ones out of leather or even inject padding under the current liners for long-term comfort. However, the best method to find out is to go and ask.

A typical and successful therapy for plantar fasciitis is a supportive pair of plantar fasciitis insoles that are designed to distribute pressure more evenly and stabilize the relevant bones within the arch. This results in decreased plantar fascia tension, stress, and pain.

Yes, many Converse shoes have replaceable insoles that can be replaced with your own orthotics.

Yes, you can place insoles in crocs as long as they allow adequate room for your foot. In fact, having insoles in your Crocs makes walking more pleasant because they literally support your feet.

Use an insole or orthotic if they provide the most comfortable feeling throughout your next long run. However, if you can run without them and have shoes that give support and stability, there is no need to add insoles.

Allbirds insoles can be hand washed but should not be machine washed. Hand-washing will extend the life of your Allbirds insoles.

Yes. Use a mild detergent to clean the spot. Avoid submerging in water. Allow the insoles to dry completely before replacing them in the shoes.

The insoles of all New Balance sneakers are removable. As a result, podiatrists “prescribe” this brand to accommodate orthotics.

While gel insoles are frequently used to provide comfort and relief from foot and heel discomfort by relieving pressure, there is no evidence to support the use of soft insoles to treat plantar fasciitis.

Orthopaedic insoles can help with osteoarthritic discomfort in the knee, foot, ankles, and hip. They aid in the absorption of shock and the reduction of stress on the cartilage. These insoles are custom-made by a podiatrist.

Running shoe insoles, in particular, have long been touted for their capacity to: Increase running efficiency. Offer pain alleviation. Maintain ankle and foot stability.

People with flat feet or recurring shin splints may benefit from orthotics. Inserts for your shoes can assist correct and stabilize your foot and ankle, relieving stress on your lower leg. Orthotics can be created specifically for your foot or purchased “off the shelf.”

While some discomfort is common during the first few weeks of using your insoles, your feet will fully acclimate to them during the break-in period. This period can last anywhere from a week to three weeks, with some people able to wear their insoles for longer periods of time in a shorter amount of time.

While insoles do not literally shrink a shoe, they do fill the empty space between your feet and the inside of the shoe. Insoles can also be removed and cleaned, which helps to keep shoes fresh. They can also be used in conjunction with toe inserts to provide additional support when shoes are too big.

Height Increase Insole

Whether you’re looking to make yourself look taller or are just looking for an additional bit of height, a height increase insole can help you achieve your goal. These insoles can be easily added to your favorite shoes and can be customized to achieve the height you desire. They’re virtually undetectable and can be trimmed to fit your shoe size. Height increase insoles can be used with most types of footwear but are not recommended for low-top shoes.

Height increase insoles are available through shoe insole companies. They are specially designed to correct the discrepancy between leg lengths and can help alleviate some of the pain experienced in the calf and heel area. These insoles are available in several different sizes and can be customized to fit your feet perfectly.

Height increase insoles are similar to other common products in many ways. They should be durable and resistant to moisture. They should also be comfortable for everyday wear. A good pair of insoles will add one to two inches to your height.

Heated Insole

A heated insole is a type of insole that enables a user to warm up their foot. The heating element is typically mounted within an opening 5 of the insole. The heating element can be of different shapes, sizes, and support contours. These heated insoles can be used to provide support or cushioning for the feet.

Most of these insoles are disposable. This makes them an environmentally friendly product that is free of plastic and other harmful materials. These heating insoles are made of non-woven fabric that heats up evenly and distributes heat to keep your feet warm. Some insoles can stay heated for as long as twelve hours.

A heated insole is typically sold in kits that include a heating element and an insole sized for the wearer’s feet. The heating element is often provided in an assembly with a flexible power cable. These electrical connectors may also include a rheostat and a rechargeable battery. The insoles themselves can be a conventional flat profile for general use, or a contoured insole designed for an engineered fit.

Best Work Boot Insole

The best work boot insole is one that offers support and comfort in your boots and is compatible with many different styles of footwear. Using an insole with your work boots can make your footwear more comfortable and prevent backaches. There are a variety of different insoles available on the market today, so it’s important to find the right one for your shoes. You can also choose an insole that is ergonomically designed for your foot size.

For added comfort, you can consider the Dr. Scholl orthotic. This insole provides extra cushioning and massaging gel technology to reduce foot fatigue and increase the life of your work boots. It also features responsive wave cushioning for a comfortable fit. It’s the best choice for workers who do not need arch support and need extra cushioning.

Despite the fact that insoles can be expensive, they can provide much-needed support for your work boots. The first step is determining whether you have a high or low arch, and then purchasing the insole that fits your arch type.

Boost Insole

If you’re short or have a small foot, a boost insole may be what you need to add some height to your shoe. These insoles will add height in a discreet manner and are compatible with most styles of shoes. In addition, they are one-size-fits-all, meaning you can buy a different size insole if you don’t fit the original one anymore.

A boost insole is made from Expanded Thermoplastic Polyurethane (E-TPU). This material is incredibly resilient and is highly responsive. It provides the cushioning and transitions you need and is also much more durable than other materials. Foamwell is a leading supplier of custom boost insoles and can work with you to create a perfect fit for your shoe.

Adidas first introduced the Boost technology to the public in 2013. It revolutionized the running industry by combining soft cushioning with responsive cushioning. At the time, EVA foam was the standard for performance running shoes. Boost introduced a midsole composed of thousands of expanded particles that provide energy return with every stride. The new midsole made adidas an icon in streetwear and sports.

Insole for Flat Feet

An insole for flat feet can help correct your gait and alleviate the pain and discomfort caused by flat feet. These insoles have been designed by podiatrists and feature a sculpted EVA footbed. They provide full-foot cushioning, heel-cupping, and moderate arch support. They also realign the feet’s position to avoid excessive pronation. There is no break-in period for these insoles, making them comfortable and practical for everyday use.

A flat foot can affect people’s posture and may lead to other problems, such as injury or pain in the ankles. An insole for flat feet should have arch support, as overpronation can cause pain and injuries in the foot and ankles. The amount of arch support needed depends on the degree of flatness and the pain you experience while walking.

There are many different kinds of insoles. Some of these are thin and flexible, while others are thick and bulky. For flat feet, the most comfortable option may be a low profile insole. Some of these are ideal for low-volume footwear, while others are designed for high-impact activities.

insoles for shoes

Insole Height Increaser

An Insole height increaser is a device that is designed to make a person taller. It works by stimulating a hormone gland in the body, causing the body to release more height hormones. An average adult can add three to five centimeters to their height with the use of a height increaser insole. The devices are available for as little as $4.95, and you can even upgrade your shipping to Express shipping for free.

A height increaser can be easily applied to any pair of shoes, regardless of size or brand. They act as adjustable lifts and are completely discreet. Human growth hormone production can be limited in some people, preventing them from reaching their full potential. Insole height increasers can help a person achieve a six-foot-tall height without using surgery. They are also ideal for athletes, as they can be adjusted to fit a wide variety of shoe sizes.

Height Increase Insoles are made of soft silicone and are comfortable to wear. They are designed to blend into any shoe, making them a good choice for everyday use. They can add an inch to a person’s height without having them notice it.

Gel Insole

A gel insole is a type of shoe insert that helps relieve the stress on the muscles and bones of the feet. They are antimicrobial, cushioning, and can be customized to the firmness level of the wearer. A gel insole is a good choice for people who like to be active but don’t want to compromise their comfort.

There are several different styles of gel insoles that are made to fit a wide variety of shoes. They are easily adjustable, and are available in men’s and women’s sizes. Many types of gel insoles are also designed to be removable and washable. Whether you use a gel insole for running or walking, you’ll appreciate the increased comfort and cushioning it offers.

Gel insoles also provide protection from hard surfaces and help to relieve pain in the heel and ball of the foot. This is because they evenly distribute pressure on the metatarsal pad. Another advantage of gel insoles is that they prevent the foot from feeling tired or burning after long periods of activity. Some gel insoles can be placed directly inside the shoe, and if the shoe doesn’t already have a gel insole, they can be cut to fit.

Ortholite Insole

The Ortholite insole is a type of eco-friendly, durable foam used in many types of footwear and athletic equipment. It is often referred to as “comfort from the inside out.” The company was founded in 1997 and has been a leader in the footwear insulation field ever since. The company’s mission is to provide comfort that improves health and performance.

Today, the company supplies insoles to more than 350 brands, from athletic giants like Nike to fashion powerhouses like Michael Kors and Sam Edelman. The company is private, so it does not disclose its specific sales numbers, but it does say that it is on the path to record gains by 2020.

The material used in OrthoLite insoles is made from open-cell polyurethane (OPU), a foam that is breathable and elastic. When pushed, the foam tends to return to its original shape, so the insole keeps the foot dry and comfortable.

Related Content