FREE MCSA 70-410: Installing & Configuring Windows Server 2012 Question and Answers
There are two branch offices and a main office for your business. A WAN link is used to connect the offices to one another.
You have a server named Server1 running Windows Server 2012 R2 in the main office.
Server 1 is set up to exclusively use IPv4 addresses.
You must give Server1 an IPv6 address. The IP address needs to be routable and private.
What IPv6 address ought to you give Server1?
Explanation:
Similar to how private addresses like 10.x.x.x, 192.168.x.x, or are private to an entity, unique local addresses in IPv6
On an IPv4 network, the addresses "172.16.0.0" and "172.31.255.255"" are usable.
Therefore, just as an address like 10.20.100.55 is not routable on the IPv4 Internet, unique local addresses are not routable on the IPv6 Internet. A distinctive local address is consistently formatted as follows:
In binary encoding, the first eight bits are always 11111101. This indicates that a distinctive local address has a prefix identifier of FD00::/8 and always starts with FD.
An Active Directory forest with the domain contoso.com exists on your network.
The forest includes the websites Site1 and Site2, as well as the domains contoso.com and child.contoso.com. The sites and domains are set up as stated in the following table.
Users are unable to access Site2 while the connectivity between Site1 and Site2 is down.
You must figure out what keeps Site2 users from accessing the child.contoso.com domain.
What must you mention?
Explanation:
The exhibit demonstrates that Site2 lacks a PDC emulator. The RID operations master role and the RID operations master role have a close relationship, therefore this is significant.
PDC emulator function.
An Active Directory domain with the name contoso.com is present on your network. The domain has a domain controller named Server1 and a member server named Server1.
Windows Server 2012 R2 is used by all servers, DC2. All domain controllers have DNS server settings enabled.
You launch Server Manager on Server1 and add DC2 as an additional server for management.
As demonstrated in the illustration, you right-click DC2 from Server Manager on Server1.
You must make sure that the DNS Manager option appears when you right-click DC2.
What ought you to do?
Explanation:
The role of Domain Name System (DNS) offers a standardized technique for connecting names with numeric Internet addresses. This enables users to refer to network computers by name rather than a long string of numbers. By integrating Windows DNS services with DHCP services, DNS record additions for newly connected PCs are no longer necessary.
An Active Directory domain with the name contoso.com is present on your network. A DHCP server running Windows Server 2012 R2 with the name of Server1 is part of the domain.
A DHCP scope called Scope1 is made by you. The scope's start and end addresses are 192.168.1.10 and 192.168.1.50, respectively, and its subnet mask is 255.255.255.192.
Make sure Scope1 has the subnet mask 255.255.255.0.
What ought to you start with?
Explanation:
A DHCP scope's network mask cannot be changed without first removing the scope and then re-creating it with the new subnet mask.
You set up a server named Server1 that runs a Server Core Installation of Windows Server 2012 R2 in a separate test environment. The Active Directory Domain Services (AD DS) are not installed in the test environment.
You configure Server1 with the Active Directory Domain Services server role.
Server1 must be set up as a domain controller.
Which cmdlet ought to be executed?
Explanation:
Install-ADDSDomainController "" creates an Active Directory domain controller.
Installs a fresh Active Directory domain configuration with the command Install-ADDSDomain ""
Installs a fresh Active Directory forest configuration with the command Install-ADDSForest ""
Install-WindowsFeature "" installs a role, service, or feature on the local server or a remote server that is running Windows Server. Operating System 2012 R2. The Add-WindowsFeature cmdlet, which was used to install roles, role services, and features, has been replaced by this one.
Install-ADDSForest -DomainName corp.contoso.com -CreateDNSDelegation DomainMode Win2008 - ForestMode Win 2008 R2 -DatabasePath "d:NTDS" is a command that can be used in the C:PS window. -SysvolPath "d:SYSVOL" ""LogPath "e:Logs"Installs a new forest named corp.contoso.com, creates a DNS delegation in the contoso.com domain, sets domain functional level to Windows Server 2008 R2 and sets forest functional level to Windows Server 2008, installs the Active Directory database and SYSVOL on the D: drive, installs the log files on the E: drive, and has has the server automatically restart after AD DS installation is complete and prompts the user to provide and confirm the Directory Services Restore Mode (DSRM) password.
Windows Server 2012 R2 is installed on a server you have named Server1.
Server1 is elevated to domain controller status.
The service location (SRV) records that Server1 registers in DNS must be viewed.
On Server1, what should you do?
Explanation:
All of the locator resource entries kept in netlogon are recorded in a log file that is created by the netlogon service.
An Active Directory forest with three domains is present on your network.
In the forest root domain, a group called Group1 is set up as a domain local distribution group.
Share1 is a shared folder that you want to give Group1 read-only access to. Share1 is housed in a child domain.
You must make sure that Group1's members can access Share1.
What ought to you start with?
Explanation:
Any domain or forest may use universal. A Universal group can also span numerous domains, even the whole forest.