FREE Ham Radio Technician I Questions And Answers
What time of year is it most likely that occasional E propagation will take place?
Any time of day can see intermittent E propagation, but these events—particularly the summer solstice, when the sun is at its farthest north in America—are when it is most likely to happen.
Which of the following things affects a parallel conductor antenna feed line's characteristic impedance?
A parallel conductor feed line, also known as a parallel-wire transmission line, is commonly used in amateur radio and other communication systems. It consists of two conductors (wires) running parallel to each other, usually spaced a certain distance apart.
Reciprocal mixing is what?
The presence of many signals in a circuit raises issues with noise and potential signal interference. Reciprocal mixing is a problem when a local oscillator picks up (mixes) nearby signals and causes interference. An example of this is hearing a powerful local broadcast station on many frequencies on your radio.
When the displayed carrier frequency is set to 7.178 MHz, what frequency range is occupied by a 3 kHz LSB signal?
To transform signals of multiple frequencies into an intermediate frequency (IF), which mixer input is adjusted or tuned?
A mixer is an essential component in superheterodyne receivers, which are commonly used in radio communication systems. The purpose of the mixer is to combine the incoming radio frequency (RF) signal with the signal generated by the local oscillator. The local oscillator generates a signal at a frequency known as the intermediate frequency (IF). When the RF signal and the local oscillator signal are mixed together, they produce a combination of sum and difference frequencies.
What is the name of the broad outer circle where the reactance arcs end on the Smith charts shown in Figure E9-3?
A sample of a Smith Chart is shown in Figure E9-3. The reactance axis is the name of the broad outer circle where the reactance arcs come to an end. This relates to our reactance arcs once more!
In a device powered by a 240 VAC single phase source, which wire(s) in a four-conductor connection should be connected to fuses or circuit breakers?
A typical 240 VAC single-phase power connection consists of two live wires, a neutral wire, and a ground wire. The live wires carry the 240 VAC voltage potential with opposite phases, providing a potential difference of 240 volts between them. The neutral wire serves as a return path for the current, and the ground wire provides a safety connection to the earth to protect against electrical faults.
Which of the following prevents alternating current from flowing via an inductor?
Reactance prevents alternating current from flowing via an inductor.
An inductor is a passive electronic component that stores energy in the form of a magnetic field when current flows through it. It consists of a coil of wire wound around a core, and its behavior is governed by the principle of electromagnetic induction.
What frequency range, with the displayed carrier frequency set to 7.178 MHz, is occupied by a 3 kHz LSB signal?
For a 3 kHz Lower Sideband (LSB) signal with the displayed carrier frequency set to 7.178 MHz, the frequency range occupied by the signal would be from 7.175 to 7.178 MHz. In Single Sideband (SSB) modulation, only one sideband (either the upper or lower sideband) and the carrier are transmitted. The other sideband is suppressed to conserve bandwidth and power. In LSB modulation, the lower sideband is transmitted, and the carrier is suppressed.
What qualifies as a defining feature of the FT8 mode of the WSJT-X family?
The phrase "Alpha, Bravo, Charlie, Delta" does not qualify as a defining feature of the FT8 mode of the WSJT-X family. Instead, a defining feature of the FT8 mode is its highly efficient and structured message format. FT8 is a digital mode used in amateur radio communications. It is part of the WSJT-X software suite developed by Joe Taylor (K1JT) and others. FT8 is designed for weak-signal communication and is especially effective under challenging propagation conditions on HF and VHF bands.
What is one benefit of employing ferrite cores in an inductor over powdered iron?
What qualifies as an Extended Double Zepp antenna?
The half-wavelength dipole with a central feed is one of the most widely used antennas. An Extended Double Zepp antenna, a center-fed 1.25-wavelength antenna with two 5/8-wave components in phase, is one example of this.
What are the bipolar transistor's stable operating points when employed as a switch in a logic circuit?
When a bipolar transistor is employed as a switch in a logic circuit, its stable operating points are the saturation and cutoff regions.
With the help of a digital signal processing noise filter, which of the following types of noise may be frequently reduced?
All of the above-mentioned types of reoccurring interference in a signal can be managed with the help of digital signal processing, or DSP.
Tri-state logic: what is it?
Digital integrated circuits (ICs) create a single logic output using logic modifications known as gates. Tri-state logic, which consists of logic elements with output states of 0, 1, and high-impedance, is a more sophisticated version of gates.
Which transmitter operators and licensees are in charge of preventing overexposure situations at a location where several transmitters are active at once?
Any transmitter that significantly exacerbates the overexposure scenario should be included in the mitigation or resolution of the problem. As a result, any station that exceeds 5% of its MPE limit is accountable for aiding in mitigation as they are already generating some amount of emissions.