FREE FDOT Hot Mix Asphalt Paving Inspection Questions and Answers

0%

What is the purpose of cold milling?

Correct! Wrong!

Explanation:
Cold milling, also known as cold planing or profiling, is a process used to remove the top layer of asphalt pavement. Its primary purpose is to eliminate irregularities in old surfaces, such as bumps, ruts, and deteriorated pavement sections, preparing the surface for resurfacing or overlaying with new asphalt layers. This process helps improve the overall smoothness and quality of the pavement surface.

Layers of pavement are referred to as _______.

Correct! Wrong!

Explanation:
In hot mix asphalt paving, layers of pavement are commonly referred to as courses. Each course represents a distinct layer of asphalt mix applied during the paving process. Understanding this terminology is essential for accurately describing the construction and inspection of asphalt pavements, ensuring effective communication among project stakeholders.

What does the screed do?

Correct! Wrong!

Explanation:
The screed is an essential component of the asphalt paving machine. Its primary function is to strike off or level the hot mix asphalt to the desired thickness and smoothness as it passes over the surface. Additionally, the screed also partially compacts the asphalt, preparing it for final compaction by subsequent rollers. Understanding the role of the screed is crucial for ensuring proper asphalt pavement quality during inspection.

What must be verified before the bituminous material is used?

Correct! Wrong!

Explanation:
Before the bituminous material is used in FDOT paving projects, it is crucial to verify the pretest number. The pretest number is a unique identifier assigned to a specific batch of bituminous material, and it ensures that the material meets the required specifications and quality standards. Verifying the pretest number helps confirm that the correct material is being used and that it has undergone the necessary testing procedures before incorporation into the pavement.

Aggregate is classified as _______ or _____, depending on the sizes of the particles.

Correct! Wrong!

Explanation:
Aggregate is classified as either fine or coarse, depending on the sizes of the particles. Fine aggregate consists of smaller-sized particles, such as sand, while coarse aggregate consists of larger-sized particles, such as gravel or crushed stone. Understanding this classification is important for properly selecting and proportioning aggregates in hot mix asphalt paving, ensuring the desired properties and performance of the pavement.

Trucks dump the hot mix into the ___________ of the paver.

Correct! Wrong!

Explanation:
Trucks dump the hot mix into the hopper of the paver. The hopper is a part of the paving machine where the hot asphalt mix is temporarily stored before it is conveyed to the screed for placement and compaction. Understanding the flow of material from the truck to the hopper is crucial for monitoring and inspecting the asphalt paving process.

The two principal parts of the paver are the _______ and the _______.

Correct! Wrong!

Explanation:
In hot-mix asphalt paving, the paver consists of two principal parts: the tractor and the screed. The tractor is the front part of the paver that contains the engine, drive system, and controls. The screed is the rear part of the paver that spreads and levels the asphalt mix to the desired thickness and density. Understanding these components is essential for effectively operating and inspecting asphalt paving equipment.

Leveling courses may be placed using two ______ and a _______.

Correct! Wrong!

Explanation:
Leveling courses, which are intermediate layers of asphalt pavement used to correct minor surface irregularities and provide a uniform base, may be placed using two motor graders and a spreader box. Motor graders are used to shape and grade the surface, while the spreader box distributes the asphalt mix evenly across the graded surface, ensuring uniform thickness and consistency. This combination of equipment allows for precise placement and compaction of the leveling course during the paving process.

Sand and stone are two commonly used _____ in hot mix asphalt.

Correct! Wrong!

Explanation:
Aggregates, such as sand and stone, are commonly used materials in hot mix asphalt. They provide the structural support and stability to the pavement. Understanding the role of aggregates is crucial for ensuring the proper composition and performance of hot mix asphalt during paving inspection processes.

A refined paving asphalt used in hot mix asphalt is _________.

Correct! Wrong!

Explanation:
Asphalt cement, also known as bitumen, is the refined paving asphalt used in hot mix asphalt. It serves as the binding agent that holds the aggregate together in the pavement. Understanding the role of asphalt cement is essential for ensuring the quality and durability of hot mix asphalt pavement during inspection processes.

The two components of hot mix asphalt are:

Correct! Wrong!

Explanation:
Aggregate refers to the mixture of crushed stone, gravel, sand, or other materials used as the structural filler in hot mix asphalt. Asphalt cement, also known as bitumen, is the binding agent that holds the aggregate together. Understanding these two components is crucial for ensuring the proper composition and performance of hot mix asphalt pavement during construction and inspection processes.

Lifetime Ad-Free Access @ $4.99

$4.99

Premium Tests $49/mo
FREE June-2024