Dressmaking and Tailoring Fundamentals Q&A

When two pieces of fabric are sewed together, the line formed is known as ________.

Placket

Seam

Patch

Pocket

Correct! Wrong!

To make an opening at one end of the seam, you must offer a ________.

Pattern

Pocket

Placket

Fastener

Correct! Wrong!

It is a pair of scissors used to cut pattern pieces, threads, seams, and buttonholes.

Seam ripper

Pinking shears

Pointed scissors

Shears

Correct! Wrong!

After the design has been conceptualized, the blueprint for the garment is constructed in this process of dressmaking.

Sketching

Garments construction

Patternmaking

Blueprint designing

Correct! Wrong!

It's the gap between the cutting line and the seam line.

Pinning

Seam allowance

Layouting

Plain seam

Correct! Wrong!

You always have a _______________ while putting up patterns for a pair of men's trouser.

Middle layout

Trial layout

Side layout

Corner layout

Correct! Wrong!

This is not a rule to follow while cutting garment components.

While cutting the fabric, walk around the table.

Set aside the cut component but do not remove the pins or patterns to keep it ready for marking.

Save all fabric scraps for future use.

The incorrect side of the material has transfer marks.

Correct! Wrong!

FREE Dressmaking and Tailoring Fundamentals Questions and Answers

When two pieces of fabric are sewed together, the line formed is known as ________.

To make an opening at one end of the seam, you must offer a ________.

It is a pair of scissors used to cut pattern pieces, threads, seams, and buttonholes.

After the design has been conceptualized, the blueprint for the garment is constructed in this process of dressmaking.

It's the gap between the cutting line and the seam line.

You always have a _______________ while putting up patterns for a pair of men's trouser.

This is not a rule to follow while cutting garment components.

FREE Tailor Tools Questions and Answers

FREE Tailor Trainer Questions and Answers

When two pieces of fabric are sewed together, the line formed is known as ________.

To make an opening at one end of the seam, you must offer a ________.

It is a pair of scissors used to cut pattern pieces, threads, seams, and buttonholes.

After the design has been conceptualized, the blueprint for the garment is constructed in this process of dressmaking.

It's the gap between the cutting line and the seam line.

You always have a _______________ while putting up patterns for a pair of men's trouser.

This is not a rule to follow while cutting garment components.

Premium Tests $49/moFREE July-2024

Premium Tests $49/mo
FREE July-2024