FREE Construction Health and Safety Technician MCQ Questions and Answers
Which of the following heat-related conditions may happen when the body's temperature regulation system malfunctions and the body is unable to efficiently remove heat from its core?
Heat stroke happens when the body's mechanism for controlling temperature malfunctions and the body is unable to efficiently expel heat to regulate its internal temperature. The body's internal temperature may increase if the sweating system malfunctions. The body's natural functions are upset when the internal temperature rises above 104 degrees Fahrenheit, which results in a medical emergency.
Which of the following DOES NOT, in general, meet NIOSH's definition of a hazard control strategy for preventing work-related injuries?
The hierarchy of controls, which recommends using engineering controls, administrative controls, and personal protective equipment in the workplace in that order to prevent work-related injuries, is encouraged by NIOSH.
For voltages up to _____ kV, cranes and derricks must be at least _____ feet away from power lines.
According to 29 CFR 1926.1408 cranes, derricks, and other tall equipment or structures must be at least 20 feet away from power lines at voltages up to 350 kV. Higher voltages necessitate longer distances.
What among the following DOES NOT characterize a limited space?
Confined spaces, as defined by 29 CFR 1926.1202, are places big enough for an employee to physically enter, with few options for entry and exit, and not intended for long-term habitation. For a space to be controlled as a restricted space, it must satisfy all three of these requirements.
The maximum compressed air pressure for cleaning tasks is ________ psi, as per OSHA rule 29 CFR 1926.302.
Only compressed air at a pressure lower than 30 psi may be used for cleaning tasks, according to OSHA regulation 29 CFR 1926.302.
Who is in charge of making sure that every hand and power instrument used on a construction site is properly maintained and functional?
Despite the fact that everyone on the job site should take responsibility for safety, it is ultimately the employer's duty to make sure that only functional hand and power instruments are used.
Personal fall arrest equipment anchor points should be able to support __________ pounds per person.
A trained person, such as an engineer, must design and install the anchor points for personal fall arrest equipment in accordance with 29 CFR 1926.502. These anchor points must be able to hold at least 5,000 pounds of force per person.