FREE CNC Cutting Basics Question and Answers
The motors that regulate feed in CNC machine tools are
Explanation:
A servo motor is a self-contained electrical apparatus that rotates machine parts precisely and efficiently.
The tapping cycle on a machine center is displayed using the G code, which is
Explanation:
Tapping is frequently programmed using g code. On CNC machines, tapping is a typical procedure used to thread holes.
The _________ is constant in axis motors for CNC machines.
Explanation:
The power increases linearly with speed while the torque remains constant throughout the spindle's speed range. In this situation, the spindle motor generates roughly 1kW for every thousand rpm (5kW at 5,000 rpm, 10 kW at 10,000 rpm, and so on).
BTR's role in the DNC is
Explanation:
Direct numerical control (DNC) is a term that refers to a variety of industrial systems where numerous NC or CNC machines are remotely managed by a host computer or when many machines and tools are directly controlled by a single computer using DNC.
A CNC component program says that the center of the clockwise circular interpolation with radius from P3 (25, 10) to P2 (10, 25) will be at
Correct answer:
(10. 10)
The definition of "baud rate" is the
Explanation:
The number of signal components or changes to the signal that take place per second as it travels via a transmission media is known as the baud rate. The speed at which data is transferred and received increases with baud rate.
The process by which the controller determines the speed and intermediate points of the axis motor is referred as as
Explanation:
Any type of programming that uses interpolation creates data points between specified coordinate axis positions. The drives move concurrently from the beginning to the finish of the command thanks to a component inside the Machine Control Unit (MCU) called an interpolator. Either an electronic piece of hardware or a piece of software powers the interpolator in a CNC system.