FREE CDL Hazardous Materials (HazMat) Endorsement Trivia Questions and Answers


Which of the following statements is true for a safety data sheet (SDS) for a hazardous material?

Correct! Wrong!

When moving dangerous garbage, you must

Correct! Wrong!

Hazard communication training is required to be given to new employees within the first 30 days of their employment.

Correct! Wrong!

Hazard communication training is required to be given to new employees before or at the time they are exposed to hazardous chemicals in the workplace, not necessarily within the first 30 days of their employment. The specific timing of the training may vary depending on the regulations and requirements of the relevant government agencies or occupational safety standards.

What is the goal of the hazardous materials regulations?

Correct! Wrong!

The hazardous materials regulations are intended to ensure the safe transportation of hazardous materials by all modes of transportation, including air, ground, and water. These regulations are designed to protect public health and safety, as well as the environment, from the risks posed by hazardous materials.

What does a W in column 1 of the Hazardous Materials Table mean in terms of the substance being hazardous?

Correct! Wrong!

Applicable only when the substance is being transported by water. Transport by air requires an "A," while international travel requires an "I."

Whenever there is proof of chemical contamination but no victims who are still alive.

Correct! Wrong!

Whenever there is proof of chemical contamination but no victims who are still alive, the appropriate action is to immediately exit the area and seek safety at a distance.

Chemical contamination poses significant risks to human health and safety. If there is evidence or suspicion of chemical contamination and no survivors or victims who require immediate assistance, it is crucial not to enter or remain in the contaminated area. Exposure to hazardous chemicals can lead to severe health effects or even death, depending on the nature of the contaminant.

Which of the following best describes the required order of information in the shipping paper's description area?

Correct! Wrong!

Identification number, legal shipping name, classification of danger, and packing group.
Note: As of January 1, 2013, all HazMat transportation must comply with this.

The Hazardous Materials Table's entries are displayed in what ways?

Correct! Wrong!

The Hazardous Materials Table's entries are displayed in alphabetical order by proper shipping names.

The Hazardous Materials Table (HMT) is a comprehensive list that provides essential information about hazardous substances or dangerous goods used in transportation and shipping. It is used to identify and classify hazardous materials during transportation to ensure proper handling, labeling, and safety measures.

The shippers, carriers, and destination's names and EPA registration numbers must appear on

Correct! Wrong!

The name and EPA registration numbers of the shippers, carriers, and destination must appear on the hazardous waste manifest. The manifest is a document that accompanies shipments of hazardous waste, and it provides important information about the waste being transported, as well as the parties responsible for generating, transporting, and receiving the waste.
The manifest must include the name, address, and EPA identification number of the generator of the waste, as well as the name, address, and EPA identification number of the transporter and the designated facility where the waste will be treated, stored, or disposed of. This information is used to track the movement of hazardous waste from its point of origin to its final destination and to ensure that the waste is handled and disposed of safely and in compliance with all applicable regulations.

Prior to 2002, the bar was yellow; it is now orange to indicate

Correct! Wrong!

Prior to 2002, the bar on hazardous material labels was yellow. However, it is now orange to indicate "Physical hazard."

In the hazard communication system used for labeling hazardous materials, such as those used in the workplace or for transportation, hazard warning labels are standardized to convey specific information about the hazards of the substances. These labels are typically affixed to containers, packages, or equipment that contain or transport hazardous materials.

Hazardous material packages must bear diamond-shaped warning labels. If a label can't fit on the package

Correct! Wrong!

The label needs to be applied to a tag that is firmly attached to the package. If a label won't fit on a package, it must still be applied by tacking it to a tag that is firmly attached to the package.

Risk Class 3 is

Correct! Wrong!

In the context of hazardous materials transportation and handling, substances are classified into different risk classes based on their characteristics and potential hazards. The classification system helps identify the proper safety measures, labeling, and handling procedures for each type of hazardous material.

Risk Class 3 is specifically assigned to flammable liquids. Flammable liquids are substances that have a flashpoint at or below 60.5°C (141°F). The flashpoint is the lowest temperature at which a liquid can produce enough vapor to form an ignitable mixture in the air near the surface of the liquid.

Which of the following is NOT a responsibility of the driver when transporting hazardous materials?

Correct! Wrong!

The driver supplies the placards and prepares the shipping documents. The shipper is in charge of creating the shipping documents and providing the placards. The driver must refuse leaky packages, ensure that the materials have been properly marked by the shipper, and transport them promptly and safely.

If placards are required, where should they be put up?

Correct! Wrong!

Placards must be located on the front, back, and both sides of the vehicle. Four placards must be used, and they must be readable from all four directions.

Which of the following claims regarding the packaging of hazardous materials is accurate?

Correct! Wrong!

Electronic shutoff valve 150 ft from vehicle

Correct! Wrong!

The phrase "MC 331 of 3,500 gallons capacity" appears to describe a type of tank truck used for transporting hazardous materials.

MC 331 is a specification established by the Department of Transportation (DOT) in the United States for cargo tank motor vehicles used in the transportation of liquefied compressed gases, such as propane, butane, or other gases. The specification sets safety standards and design requirements for these tank trucks to ensure the secure transport of hazardous materials.

Lifetime Ad-Free Access @ $4.99


Premium Tests $49/mo
FREE June-2024