Dallah Test Traffic Signs and Signals 2 — Questions and Answers
Question 1: What does a green arrow signal at a traffic light allow?
- Movement in any direction
- Movement only in the direction the arrow points, regardless of other signals (Correct answer)
- Pedestrians to cross
- Emergency vehicles to pass
Correct answer: Movement only in the direction the arrow points, regardless of other signals
A green arrow allows protected movement only in the direction indicated. Even if other lights are red, the green arrow means you may proceed in that specific direction as opposing traffic is held.
Question 2: What is the meaning of road markings with a solid white line on your side and a dashed line on the other side?
- Parking is allowed on your side
- You cannot overtake, but vehicles on the other side can (Correct answer)
- Both sides can overtake freely
- No vehicles are allowed in either lane
Correct answer: You cannot overtake, but vehicles on the other side can
A solid line on your side means you must not cross the line to overtake. A dashed line on the opposite side means vehicles traveling in that direction may overtake when safe. The rule applies to the marking on your side.
Question 3: What does a sign showing a red circle with a diagonal line over a horn symbol mean?
- Honk your horn to warn others
- Horn use is prohibited in this area (Correct answer)
- Emergency vehicles only
- Sound your horn at intersections
Correct answer: Horn use is prohibited in this area
A red circle with a diagonal line through any symbol means that action is prohibited. A horn with this marking means using the vehicle horn is prohibited in that area, typically near hospitals, schools, or residential zones.
Question 4: What do chevron signs (arrows on rectangular boards) on curves indicate?
- The road is straight ahead
- The direction and sharpness of the curve to guide drivers safely through it (Correct answer)
- A parking area ahead
- A speed bump ahead
Correct answer: The direction and sharpness of the curve to guide drivers safely through it
Chevron signs are placed on curves to indicate the direction of the curve and help drivers navigate safely, especially at night or in poor visibility. More chevrons indicate a sharper curve.
Question 5: What does a brown sign with white text typically indicate on Saudi highways?
- Speed limit
- Tourist attraction or point of interest (Correct answer)
- Danger ahead
- Fuel station nearby
Correct answer: Tourist attraction or point of interest
Brown signs in Saudi Arabia indicate tourist attractions, historical sites, natural landmarks, or points of interest. This follows international signage color conventions used on the Saudi highway system.
Question 6: What does double solid yellow lines in the center of a road mean?
- Parking allowed on either side
- No passing or crossing from either direction (Correct answer)
- Lane merging ahead
- Speed bump approaching
Correct answer: No passing or crossing from either direction
Double solid yellow center lines prohibit passing or crossing from either direction. They are used on two-way roads where visibility or road conditions make passing dangerous from both directions.
Dallah Test Traffic Signs and Signals 2
What does a green arrow signal at a traffic light allow?