FREE Maryland MVA Permit Questions and Answers
You must not: When approaching or moving through a work zone,
Be aware of what other cars are doing when entering or passing through a work zone, and take care to avoid making unexpected movements. Do not weave between lanes. Brake gradually to give oncoming traffic plenty of time to slow down. Maintain a steady pace with the traffic.
The risk of hydroplaning increases:
when it first starts to rain
What is forbidden while driving on a highway's trafficked section?
While driving on a highway's trafficked section, stopping is generally forbidden. Highways are designed for continuous, high-speed traffic flow, and stopping on the main lanes can be extremely dangerous and can lead to accidents.
Pavement markings: What, when used alone or in conjunction with other traffic control measures, give drivers crucial direction and information without needing them to take their eyes off the road?
Highway markings, when used alone or in conjunction with other traffic control measures, give drivers crucial direction and information without needing them to take their eyes off the road. Highway markings are painted or applied on the pavement to provide important information to drivers, guide traffic flow, and improve safety.
You must cross a sidewalk or enter a public road or street from an alley, driveway, private road, or building.
You need to stop and give way to pedestrians and other cars when leaving an alley, driveway, private road, or building and moving across a sidewalk or onto a roadway or highway.
If you are traveling more slowly than the other cars on a highway with two or more lanes in your direction, you should
When there are two or more lanes of traffic traveling in the same direction, slower moving cars should utilize the right lane, unless passing or making a left turn.
Right of Way: What should I do when I enter a road from a driveway, an alley, or the side of the road?
When you enter a road from a driveway, an alley, or the side of the road, you should yield to both vehicles already on the main road and pedestrians on the main road. This is to ensure that you enter the road safely and avoid impeding the flow of traffic or endangering pedestrians crossing the road.
Headlights: According to Maryland law, what must drivers do when the weather is bad?
According to Maryland law, when the weather conditions require the use of windshield wipers, drivers must also turn on their headlights. This law is commonly known as the "wipers on, lights on" law.
Which of the following will NOT help stop aggressive driving and road rage?
One form of aggressive driving is tailgating. Keep a safe following distance from the car in front of you so you have enough time to stop and avoid an accident.
There will be __ points added to your driving record if you are discovered to be operating a vehicle while under the influence of alcohol or any controlled substance.
12 points will be added to your driving record if you are discovered to be operating a vehicle while under the influence of alcohol or any other controlled substance. You will be notified that your license has been revoked if you accrue 12 points in two years.
What distinguishes red arrow traffic signals from those with solid red lights in terms of traffic signals?
You must use your headlights whenever you can't see at least _______ feet in front of you clearly.
Whenever you can't see at least 1,000 feet in front of you clearly, you must turn on your headlights. Keep in mind that 1,000 feet will be covered by your car in just over 11 seconds at 60 mph.
Road Conditions: What should you do if you're driving in a funeral procession?
Lanes are identified by double-broken yellow lines on both sides as follows:
The statement is incorrect. Lanes that are identified by double-broken yellow lines on both sides are not reversible lanes. Instead, they typically indicate a reversible lane is ahead.
You must NOT drive if a tire blows out.
Hold the wheel firmly and steer straight ahead while slowly releasing the pedal if you have a blowout. Stop braking as soon as you have control of the car again. At the closest safe area, completely remove the car from traffic.
Driving Circumstances: When driving at night while using high beams, you must switch to low beam at least ______________ before encountering oncoming traffic.
When driving at night and using high beams, you must switch to low beams at least 500 feet before encountering oncoming traffic. This distance allows the driver to adjust their headlights to avoid blinding other drivers with the intense brightness of high beams.