Free NCCER Power Tools Test 2
The gunpowder cartridges used to power a power-actuated tool are called _______.
Gunpowder cartridges used in power-actuated tools, such as powder-actuated nail guns, are commonly referred to as boosters. These boosters contain a small amount of gunpowder that, when ignited by a firing pin, propels a fastener into the material being worked on. Understanding the terminology and components of power-actuated tools is important for safe and effective use in construction and other industries where fastening materials is necessary.
Keep the drill's air vent clean with a _______.
It's important to keep the air vent of a drill clean to prevent dust and debris from clogging the ventilation, which can lead to overheating of the drill motor. Using a small brush or stick allows you to safely remove accumulated dirt and debris from the air vents, ensuring efficient cooling and prolonging the lifespan of the drill. This practice is a basic maintenance step recommended for the safe and effective operation of power drills in various construction and workshop settings.
Before you plug any saw into a power source, make sure the ______.
Before plugging any saw into a power source, it's essential to ensure that the power switch is in the OFF position. This precaution prevents accidental activation of the saw when plugging it in, reducing the risk of injury. Once the saw is properly plugged in and secured, other safety measures such as adjusting the speed, clamping down the workpiece, and ensuring the lower blade guard is in place should also be followed to ensure safe and effective operation.
The adjustable tool rest on a bench grinder should be positioned ___ inch from the wheel.
The adjustable tool rest on a bench grinder should be positioned approximately 1/8 inch away from the grinding wheel. This distance helps ensure that the workpiece is adequately supported while grinding, minimizing the risk of the tool catching or jamming in the wheel. Proper adjustment of the tool rest is crucial for safety and achieving accurate grinding results when using bench grinders in various workshop applications.
The ____ on a circular saw is a metal guide that slips into slots in the saw's baseplate.
A rip guide on a circular saw is a metal guide that slides into slots in the saw's baseplate. It helps to guide the saw along a straight path when making rip cuts (cuts parallel to the wood grain). This accessory is essential for achieving accurate and straight cuts, particularly when precision and consistency are required in woodworking and construction projects. Understanding the functions and uses of tools like rip guides is fundamental for safe and effective operation in the trades.
On power tools, you should never engage the _____.
Trigger locks on power tools are designed to prevent accidental activation of the tool by locking the trigger in place. Engaging or using the trigger lock incorrectly can lead to unsafe conditions, as it overrides the intended safety feature of manual trigger control. It's essential to never engage the trigger lock unless the tool is being stored or transported in a manner that requires it to be secured in a non-operating state.
Use only a bandsaw that has a ______.
A bandsaw should have a stop feature, which allows the machine to be quickly turned off in case of an emergency or when adjustments are needed. This safety feature enhances the control and safety of operating the bandsaw, ensuring that operators can quickly stop the machine if necessary to prevent accidents or injuries.
When cutting with a circular saw, grip the saw handles _____.
When using a circular saw, it's important to maintain a secure grip on the handles with both hands. This grip provides better control over the saw, reduces the risk of kickback or loss of control, and helps ensure accurate and safe cutting. Gripping the saw firmly with both hands also helps distribute the weight of the saw more evenly, reducing fatigue during extended use.
To prevent electric shock, only use tools that have proper:
Proper ground fault protection is essential to prevent electric shock when using power tools. Ground fault protection devices, such as ground fault circuit interrupters (GFCIs), monitor the flow of electricity and can quickly cut power if they detect an imbalance, thereby protecting users from electrical hazards. It's important to always use tools that have this safety feature, especially when working in environments where moisture or wet conditions could increase the risk of electric shock.
Before plugging a saw into a power source, make sure the:
Before plugging any saw into a power source, it is crucial to ensure that the power switch is in the OFF position. This safety precaution prevents the saw from accidentally starting when it is plugged in, reducing the risk of injury to the operator or damage to the saw itself. Once the saw is safely plugged in and positioned, other safety checks, such as ensuring the blade guard is in place and the blade is properly secured, should also be performed before operating the saw.
The speed at which stock is pushed through a saw blade is the ________.
The feed rate refers to the speed at which material (stock) is pushed through a saw blade during cutting. Controlling the feed rate is crucial for achieving smooth and accurate cuts while using power saws like table saws, band saws, or circular saws. Maintaining an appropriate feed rate helps prevent kickback, ensures safety, and enhances the quality of the cut.